Model List
Model List
Model List Option
Connector and cable
Name | Specifications | Type | |||
---|---|---|---|---|---|
For main circuit of amplifier |
Power supply connector (for amplifier control power and main power supply) |
0.05 to 1.5kW (to 1.0kW with GYG) |
1 set | WSK- S05P-E |
|
DC circuit connector (wiring of external regenerative resistor, DC reactor, DC link circuit) *1 |
0.05 to 1.5kW (to 1.0kW with GYG) |
1 set | WSK- R06P-E |
||
Motor power connector (wiring of main motor power) |
0.05 to 1.5kW (to 1.0kW with GYG) |
1 set | WSK- M03P-E |
||
For sequence I/O (between host and amplifier) |
Sequence I/O cable |
All capacities | 3m (bare wires on one side) |
WSC- D36P03 |
|
Sequence I/O connector kit *4 |
Amplifier side : All capacities |
1 set | WSK- D36P |
||
For encoder (between amplifier and motor) |
Encoder cable | 3000r/min for 0.05 to 0.75kW |
2m (connector at both ends) |
WSC- P06P02-E |
|
5m (connector at both ends) |
WSC- P06P05-E |
||||
10m (connector at both ends) |
WSC- P06P10-E |
||||
20m (connector at both ends) |
WSC- P06P20-E |
||||
3000r/min for 1.0 to 5.0kW 2000r/min for 0.5 to 2.0kW 1500r/min for 0.5 to 1.3kW |
5m (connector at both ends) |
WSC- P06P05-C |
|||
10m (connector at both ends) |
WSC- P06P10-C |
||||
20m (connector at both ends) |
WSC- P06P20-C |
||||
Encoder connector kit *4 |
Amplifier side : All capacities |
1 set | WSK- P06P-M |
||
Motor side : 0.05 to 0.75kW |
1 set | WSK- P09P-D |
|||
Motor side : 0.5 to 5.0kW |
1 set | WSK- P06P-C |
|||
For motor power (between amplifier and motor) |
Motor power cable | For main motor power *2 |
GYS,GYC,GYB: 0.05 to 0.75kW |
2m (bare wires on one side) |
WSC- M04P02-E |
5m (bare wires on one side) |
WSC- M04P05-E |
||||
10m (bare wires on one side) |
WSC- M04P10-E |
||||
20m (bare wires on one side) |
WSC- M04P20-E |
||||
For brake power *3 |
GYS,GYC,GYB: 0.05 to 0.75kW |
2m (bare wires on one side) |
WSC- M02P02-E |
||
5m (bare wires on one side) |
WSC- M02P05-E |
||||
10m (bare wires on one side) |
WSC- M02P10-E |
||||
20m (bare wires on one side) |
WSC- M02P20-E |
||||
Motor power connector kit |
For main motor power *4 |
Motor side : GYS, GYC, GYB 0.05 to 0.75kW |
1 set | WSK- M04P-E |
|
For brake power *4 |
Motor side : GYS, GYC, GYB 0.05 to 0.75kW |
1 set | WSK- M02P-E |
||
For main motor power *4 |
Motor side : GYS1.0 to 2.0kW GYG0.5 to 2.0kW |
1 set | WSK- M04P-CA |
||
Motor side : GYS3.0 to 5.0kW GYC1.0 to 2.0kW |
1 set | WSK- M04P-CB |
|||
For main motor power + brake power *4 |
Motor side : GYS1.0 to 2.0kW GYG0.5 to 2.0kW |
1 set | WSK- M06P-CA |
||
Motor side : GYS3.0 to 5.0kW GYC1.0 to 2.0kW |
1 set | WSK- M06P-CB |
|||
For SX bus |
SX bus cable | For VS and LS type servo amplifiers |
0.3m (connector at both ends) |
NP1C- P3 |
|
0.6m (connector at both ends) |
NP1C- P6 |
||||
0.8m (connector at both ends) |
NP1C- P8 |
||||
2m (connector at both ends) |
NP1C- 02 |
||||
5m (connector at both ends) |
NP1C- 05 |
||||
10m (connector at both ends) |
NP1C- 10 |
||||
15m (connector at both ends) |
NP1C- 15 |
||||
25m (connector at both ends) |
NP1C- 25 |
*1: One connector is included in the accessory of the main body of the servo amplifier.
*2: Use this cable with motor power connector (on amplifier side) WSK-M03P-E.
*3: Use this cable as a brake cable of the motor equipped with a brake.
*4: Use this connector when the customer fabricates a cable at arbitrary length.
Common options
Specifications | Type | |||
---|---|---|---|---|
ABS backup battery |
Set of battery and case (*With case) |
1 set | WSB- SC |
|
Battery (*Discrete replacement battery) |
1 piece | WSB- S |
||
External regenerative resistor |
200V | 3000r/min for 0.05 to 0.4kW | WSR- 401 |
|
3000r/min for 0.75 to 1.5kW, 2000r/min for 0.5 to 1.0kW, 1500r/min for 0.5 to 0.85kW | WSR- 152 |
|||
3000r/min for 2.0 to 3.0kW, 2000r/min 1.5 to 2.0kW, 1500r/min 1.3kW | DB11-2 | |||
3000r/min for 4.0 to 5.0kW | DB22-2 | |||
100V | 3000r/min for 0.05 to 0.375kW | WSR- 751 |
||
For PC loader connection |
RS-232C - RS-485 conversion adaptor |
For connection of RS-485 port of VV type servo amplifier *1 |
- | NW0H- CNV |
Cable | 2m (connector at both ends) |
WSC- PCL |
||
Servo operator *2 | - | WSP- 51 |
*1: Prepare a marketed USB cable (A-B type) for the USB port.
*2: Use a commercially-available USB cable (USB-A : USB-B, or USB-A : mini-B) when connecting the servo operator to PC.Use a commercially-available LAN cable when connecting the servo operation to the servo amplifier.
This servo operator can only be used with VV type amplifier.