FRENIC-VP(F3)
Standard Specifications | Three-phase 400V

This type is not available in this region.
If you need more information for this products, please contact us through the inquiry form.

This type is not available in this region.
If you need more information for this products, please contact us through the inquiry form.

This type is not available in this region.
If you need more information for this products, please contact us through the inquiry form.

Basic type（Three-phase 400V）

Item Specifications
Model Current Representation
(FRN□□□□F3S-4C)		 0009 0013 0018 0025 0031 0037 0044 0059 0072
Standard Applicable Motor [kW]
（Note1）		 ND 3.7 5.5 7.5 11 15 18.5 22 30 37
HND 2.2 3.7 5.5 7.5 11 15 18.5 22 30
Rated
Output		 Rated Capacity [kVA]
（Note1）		 ND 7 10 13 19 24 28 34 45 55
HND 5.5 7.2 10 13 19 24 29 34 46
Rated Voltage（Note 3） Three-Phase 380–480V (with AVR function)
Rated Current [A]（Note 4） ND 9.4 12.5 17.5 25 31 37 44 59 72
HND 7.2 9.4 12.5 17.5 25 31 38 45 60
Overload Rated Current [A]
(allowable overload duration)		 ND Rated Output Current 120% - 1 min
HND Rated Output Current 120% - 1 min
Surrounding Temperature ND –10 to +50°C [14 to 122°F]
(current derating required for temperatures between +40 to +50°C [104 to 122°F])
HND –10 to +55°C [14 to 131°F]
(current derating required for temperatures between +50 to +55°C [122 to 131°F])
Rated Frequency [Hz] 50/60 Hz
Input
Power
Supply		 Main Power Supply
(Phases, Voltage, Frequency)		 Three-Phase 380–480V, 50/60 Hz
Main Power Supply
(Voltage, Frequency /
allowable variations)		 Voltage: +10% to –15% (Phase imbalance not exceeding 2%)（Note 8）,
Frequency: +5% to –5%
Rated Input
Current [A]
（Note5）		 With
DCR		 ND 7.3 10.6 14.4 21.1 28.8 35.5 42 57 69
HND 4.5 7.4 10.6 14.4 21.1 28.8 36 42 57
Without
DCR		 ND 13.0 17.3 23.2 33.0 43.8 52.3 61 78 94
HND 8.3 13.2 17.3 23.2 33.0 43.8 52 61 78
Required Power Supply
Capacity (with DCR) [kVA]
（Note 6）		 ND 5.1 7.3 10 15 20 25 29 39 47
HND 3.1 5.1 7.3 10 15 20 25 29 39
Control Power Supply
(Phases, Voltage, Frequency)		 － Single-Phase
380–480V,
50/60Hz
Braking Connectable Resistor
（Note 7）		 ND 40% 27% 12%
HND 67% 40% 15%
Braking Transistor Standard Built-In
Value of Braking Transistor [Ω] 130～200 Minimum 80 Minimum 60 Minimum 40 Minimum 34.4 Minimum 16
Braking Resistor [Ω] External Options
DC Reactor (DCR) External Options
Protection Construction (IEC 60529) IP20 Enclosed, UL Open Type（Note 9）
Cooling Method Fan Cooling
Weight [kg] 1.8 3.8 3.8 3.8 5.3 5.3 5.4 11 11

Note 1

The standard applicable motor refers to the 4-pole standard motor from Fuji Electric.
During selection, the standard should not be based on kW,
but rather on the inverter’s rated output current being greater than or equal to the motor’s rated current.

Note 2

The rated capacity is calculated based on an output rated voltage of 440V.

Note 3

The output voltage must not exceed the power supply voltage.

Note 4

If the carrier frequency (function code F26) setting exceeds the following values, the frequency must be reduced:
ND specifications: All models 4kHz
If the ambient temperature exceeds 40°C, the rated current must be reduced by 2%/℃.
HND specifications: FRN0009F3S-4C: 8kHz, FRN0013–0059F3S-4C: 10kHz, FRN0072F3S-4C: 6kHz

Note 5

This value represents the power supply capacity of 500kVA (for inverters with capacities of 50kVA or above, the inverter capacity is more than 10 times greater).
It is a calculated value when the power supply is connected at 5% phase variation.

Note 6

This value refers to the situation with a DC reactor (DCR) installed.

Note 7

This value shows the average braking torque for a single motor (varies with motor efficiency).

Note 8

Phase imbalance rate [%] = (Maximum Voltage [V] - Minimum Voltage [V]) / 3-Phase Average Voltage [V] × 67 (Reference: IEC/EN 61800-3).
A balance rate of 2–3% requires the use of an AC reactor (ACR: optional).

Note 9

Electrical equipment dust and water resistance standards as specified in IEC 60529.
The two digits (The first and second characteristic digits) following the abbreviation IP (International Protection) represent the protection rating of the product’s
enclosure, indicating its resistance to the ingress of solids and water into the interior.

This type is not available in this region.
If you need more information for this products, please contact us through the inquiry form.

This type is not available in this region.
If you need more information for this products, please contact us through the inquiry form.

This type is not available in this region.
If you need more information for this products, please contact us through the inquiry form.

Contact Us