Specifications

Outline drawing
Outline drawing
14 points 24 points 32 points 40 points 60 points
W 90 90 130 130 175
H 90 90 90 90 90
D 80 80 80 80 80
General specifications
Item Specifications
Physical environment Operating ambient temperature 0 ～ +55℃
Storage (transportation) temperature -20 ～ +70℃
Relative humidity 20 to 95% RH, No condensation (5 to 95% RH during transportation, No condensation)
Pollution degree Pollution degree 2 Note 1)
Corrosion resistance No corrosive gas
No adhesion of organic solvents
Usage altitude Altitude of 2000 m or less
(Air pressure of 70 kPa or more during transportation)
Mechanical resistance Vibration resistance One-way amplitude: 0.15 mm, constant acceleration: 19.6 m/s2 2 hours in each direction, total of 6 hours Note 2) Note 3)
Shock resistance Peak acceleration: 98 m/s2 , 3 times in each direction
Electrostatic discharge Electrostatic discharge ±4 kV: Contact discharge method
±8 kV: Aerial discharge method
Radiated radio
Frequency electromagnetic field		 80-1000MHz 10V/m
1.4-2.0GHz 3V/m、2.0-2.7GHz 1V/m
EFT burst wave Power line, I/O signal line (AC non-shielded line): ±2 kV
Communication line, I/O signal line (excluding AC non-shielded line): ±1 kV
Lightening surge AC power supply: Common mode ±2 kV, Normal mode ±1 kV
DC power supply: Common mode ±0.5 kV, Normal mode ±0.5 kV
Radio-frequency electromagnetic field
conduction interference		 150 kHz to 80 MHz, 10 V
Power frequency magnetic field 50 Hz, 30 A/m
Square wave impulse noise ±1.5 kV, rise time 1 ns; pulse width 1 μs, 50 Hz
Structure Open type equipment (panel built-in type)
Cooling system Natural air cooling

Note1

Pollution degree 2: Normally, this is the state in which non-conductive pollution occurs. However, there are circumstances stipulated in which condensation may produce a state of temporary conductivity.

Note2

This is a mounted state in which the unit is fixed to the control panel with fixing screws. Make sure there is no vibration or shock during DIN rail mounting.

Note3

Make sure to implement vibration countermeasures for environments in which there is repeated or continuous vibration.

Power supply specifications
Item NA0P -31C
(AC power supply type)		 NA0P -34C
(DC power supply type)
Rated voltage 100 to 240 V AC 24 V DC
Voltage tolerance 85 to 264 V AC 20.4 to 28.8 V DC
Rated frequency 50/60 Hz -
Frequency tolerance 47 to 63 Hz -
Time allowed for instantaneous power failure 1 cycle or less < 20 ms
Waveform distortion rate 5% or less -
Wave ripple rate - -
Rated output voltage 1
(internal 5 V)		 5 V DC ±5%
Rated output voltage 2
(internal 24 V)		 24 V DC ±10%
Rated output voltage 3
(service 24 V)		 24 V DC ±10%
Leak current 0.25 mA or less 0.25 mA or less
Inrush current 40 Ao-p or less, 10 ms or less 150 Ao-p or less, 10 ms or less
Dielectric strength 2300 Vrms AC, 1 minute
Between power input terminals and ground		 510 Vrms AC, 1 minute
Between power input terminals and ground
Insulation type Transformer insulation
Insulation resistance 10 MΩ or more using 500 V DC megger
Performance specifications
Item Basic unit specifications
14/24 points 32/40/60 points
Control system Stored program and cyclic scanning system(default task), periodic task, event task
I/O connection method Direct I/O system: Local bus
Direct I/O control method Overall Scan batch refresh method
Digital I/O Task synchronization refresh method
MPU 16-bit OS/Executing Processor (dual use)
Memory type Program memory, data memory, temporary memory
Programming language <IEC61131-3 compliant> IL language (Instruction List)
ST language (Structured Text)
LD language (Ladder Diagram)
FBD language (Function Block Diagram)
SFC elements (Sequential Function Chart)
Instruction word length Variable length (depending on the instruction) 1 step = 32-bit length
Instruction execution time LD instruction 0.30 μs
Program memory capacity 8 k steps (1 step = 32 bits) 20 k steps (1 step = 32 bits)
I/O memory (I/Q) %I, %Q Fixed 512 words
System memory (SM) %M 10 Fixed 512 words
Data memory capacity 20 k words 20 k steps (1 step = 32 bits)
High-speed standard memory (M) %M 1 Fixed 4 k words
Standard memory (M) %M 1 Variable 0 k word 4 k words
Retained memory (RM) %M 3 Variable 2 k words 4 k words
UserFB instance memory (FM) %M 5 Variable 4 k words 8 k words
UserFB instance memory initial value setting area - Variable 4.5 k words 9 k words
SystemFB instance memory (SFM) %M 8 Variable 5.5 k words 11 k words
Timer Variable 256 points (2 k words) 512 points (4 k words)
Integrating timer Variable 0 point (0 k word) 0 point (0 k word)
Counter Variable 256 points (1 k words) 512 points (2 k words)
Edge detection Variable 1024 points (2 k words) 2048 points (4 k words)
Other Variable 0.5 k words 1 k words
FB instance information area
(number of instances usable in UserFB)		 1024 words
(256 info.)
ZIP file area 64 K bytes
Data type REAL: Real type
INT: Integer type
DINT: Double-precision integer type
UINT: Unsigned integer type
UDINT: Unsigned double-precision integer type
BOOL: 1-bit bit string type
WORD: 16-bit bit string type
DWORD: 32-bit bit string type
DT: Date and time type
DATE: Date type
TOD: Time type
TIME: Duration type
Array data type
Structure data type
Number of tasks Default task 1
Periodic task 15
(Total number of periodic and event tasks)
Event task
POU UserPG 64 / default task
8 / Interrupt task
UserFB 128
UserFCT 128
Number of nested
UserFB/FCT calls		 Total of 64 steps
(UserFB/FCT calls from PG are also included)
Diagnostic function Program check, watchdog timer, etc.
Security function Password
Calendar function Supported
Backup Program memory FLASH memory
System definition FLASH memory
Zip file FLASH memory
Data memory Battery: SRAM
Calendar Battery: RTC
Memory pack External: Detachable Storage content
: Program
: System definition
: ZIP file
: Data

Related information

MICREX-SX SPH Series
MICREX-SX SPH Series
MICREX-SX SPF Series
MICREX-SX SPF Series