Instrumentation
Single-Beam NDIR Gas Analyzer <ZPB> with sample-switching system (drift-less type)

Single-Beam NDIR Gas Analyzer ZPB

Simultaneous and continuous measurement of up to 5 components among NO, SO2, CO, CO2, and O2 in incinerators or thermal power plant boilers

Sample switching system offers higher stability

  • Long-term superior stability: zero drift ±0.5% FS per week

  • Compact and lightweight: 19-inch rack mount

  • Built-in magnetic O2 sensor or optional galvanic O2 sensor

  • Optional functions include: atmospheric
    pressure compensation, RS-485 communication, automatic calibration, alarm output, O2 correction, and more.

  • Low maintenance

Manual

Sample switching system

Specifications

Principle Non dispersive infrared sensor (single beam system)
O2 sensor: built-in magnetic or galvanic sensor, or external zirconia sensor (ZFK7)
Measurable components and ranges NO: 0–50 ppm…5000 ppm
SO2: 0–50 ppm…5000 ppm
CO2: 0–50 ppm…25 vol%
CO: 0–50 ppm…5000 ppm
Built-in galvanic O2 sensor: 0–10 vol%…25 vol%
Built-in magnetic O2 sensor: 0–5 vol%…100 vol%
External zirconia O2 sensor: 0–5 vol%…25 vol%
No. of ranges Up to 2 ranges per component
Repeatability ≤ ±0.5% FS
Linearity ≤ ±1% FS
Zero drift ≤ ±0.5% FS per week
Span drift ≤ ±2% FS per week
Response time (for 90%) ≤ 30 s (Loss time may vary with gas switching timings)
Analog output signal 4–20 mA DC or 0–1 V DC
Display Backlit LCD (Japanese, English, or Chinese)
Instantaneous value, O2-corrected instantaneous value, O2 corrected average value, O2 average
Range switchover by key operation, automatic, or by external contact input (option)
Contact input (option) Voltage contact input (12–24 V DC, up to 15 mA)
Remote range-switching, auto-calibration remote start, remote hold, average reset
Contact output (option) SPDT relay contact (24 V DC/1 A)
Device error, calibration error, range identification, auto-calibration status, solenoid valve drive for auto-calibration, limit alarm, CO peak alarm
Atmospheric pressure correction (optional) Built-in option available
Standard functions Output hold, auto/manual range switching
Optional functions Auto calibration, auto calibration remote start, remote hold of output, range identification contact output, high/low limit alarm, O2 correction, O2-corrected average values, average resetting contact input, CO peak alarm contact output
Communication (option) RS-485 (Modbus) (9-pin D-sub output): half-duplex, start-stop synchronization system
Flowmeter Provided
Gas inlet/outlet Rc 1/4 or NPT 1/4 internal thread
Purge gas flow rate 1 L/min (as needed)
Reference gas Required (dry N2 or dry air)
Operating environment -5°C to +45°C, RH90% or lower (non condensing)
Power supply voltage 100–240 V AC, 50/60 Hz
Power consumption Approx. 120 VA
Dimensions 133 (H) × 483 (W) × 382 (D) mm
Weight Approx. 13 kg
Conformity CE Marking

Gas conditions

Flow rate 1.0 L/min ±0.2 L/min
Temperature 0–50°C
Pressure ≤ 10 kPa
Dust ≤ 100 μg/Nm3 with particle size ≤ 0.3 μm
Mist Unallowable
Moisture Below the saturation vapor density at 2°C (both sample gas and reference gas)
Corrosive gas HCl: ≤ 1 ppm

Gas Analyzers

Flue gas analyzer system <ZSU> NOx, SO2, CO, CO2, O2
Flue Gas Analyzer System <ZSU> NOx, SO2, CO, CO2, O2

• Double-beam NDIR sensor + O2 sensor
• Long-term stability
• Continuous measurement of up to 5 components

  • # 5 components
  • # JP type approval
  • # Easy maintenance
  • # Auto calibration
Flue gas analyzer system <ZSJ> NOx, SO2, CO, CO2, O2
Flue Gas Analyzer System <ZSJ> NOx, SO2, CO, CO2, O2

• Single-beam NDIR sensor with sample switching system + O2 sensor
• Excellent zero-point stability
• Continuous measurement of up to 5 components

  • # 5 components
  • # JP type approval
  • # Easy maintenance
  • # Driftless
Flue gas analyzer system <ZSU-7> NOx, SO2, CO, CO2, O2, HCl, dust
Flue Gas Analyzer System <ZSU-7> NOx, SO2, CO, CO2, O2, HCl, dust

• Monitors up to 7 gas concentrations
• Space-saving design

  • # 7 components
  • # Space saving
  • # Easy maintenance
  • # Less wiring work
Cross stack laser gas analyzer <ZSS>HCl, NH3, O2, CO2, CH4
Cross Stack Laser Gas Analyzer <ZSS> HCl, NH3, O2, CO, CO2, CH4

• Direct insertion type
• Continuous measurement of HCl, NH3, O2, CO, CO2, and CH4 in flue gas

  • # Fast response ≤ 2 s
  • # In situ
  • # CO+Ｏ2 measurement
  • #
Aerosol analyzer <ZSF>
Aerosol Analyzer <ZSF>

Real-time and quantitative analysis of particle size, number of particles, composition (sulfate, nitrate, black carbon) of aerosol (PM2.5) in the air

  • # Real-time analysis ≤ 15 min
  • # PM2.5
  • # Black carbon, sulfate, nitrate
  • # high precision
In-situ zirconia oxygen analyzer system <ZSB>
In-Situ Zirconia Oxygen Analyzer System <ZSB>

• Continuous measurement of O2 in combustible gas
• Ideal for combustion control

  • # Fast response ≤ 10 s
  • # Insertion type
  • # Auto calibration
  • # Blow down
Double beam NDIR gas analyzer <ZKJ>NO, SO2, CO, CO2, O2, H2S, CH4
Double Beam NDIR Gas Analyzer <ZKJ> NO, SO2, CO, CO2, N2O, CH4, O2

• Double-beam NDIR sensor
• Continuous measurement of up to 5 components

  • # 5 components 0-20 ppm
  • # Double beam NDIR
  • # Auto calibration
  • # Rangeability 1:25
Single beam NDIR gas analyzer <ZPA>NO, SO2, CO, CO2, O2
Single Beam NDIR Gas Analyzer <ZPA> NO, SO2, CO, CO2, CH4, O2

• Single-beam NDIR sensor
• Compact and light weight
• Continuous measurement of up to 5 components

  • # 5 components 0-200 ppm
  • # Single beam NDIR
  • # Auto calibration
  • # Rangeability 1:10
Single beam NDIR gas analyzer <ZPB>NO, SO2, CO, CO2, O2
Single Beam NDIR Gas Analyzer <ZPB> NO, SO2, CO, CO2, O2

• Single-beam NDIR sensor with sample-switching system
• Continuous measurement of up to 5 components

  • # 5 components 0-50 ppm
  • # Sample-switching
  • # Auto calibration
  • # Driftless
Single beam NDIR gas analyzer <ZPG>NO, SO2, CO, CO2, O2
Single Beam NDIR Gas Analyzer <ZPG> NO, SO2, CO, CO2, O2

• Single-beam NDIR sensor with sample-switching system
• Continuously measures low concentration (0•5 ppm) gases

  • # Low range 0-5 ppm
  • # SAample-switching
  • # Auto calibration
  • # Driftless
Single beam NDIR gas analyzer <ZRE>NO, SO2, CO, CO2, O2
Single Beam NDIR Gas Analyzer <ZRE> NO, SO2, CO, CO2, O2

• Single-beam NDIR sensor
• Compact and light weight
• Continuous measurement of up to 5 components

  • # 5 components 0-200 ppm
  • # Single beam NDIR
  • # Auto calibration
  • # Rangeability1:10
Thermal conductivity gas analyzer <ZAF> H2, He, Ar
Thermal Conductivity Gas Analyzer <ZAF> H2, He, Ar

Best suited for H2, He, and Ar measurement

  • # Easy-to-see LCD
  • # Auto calibration
  • # Fast response ≤ 10 s
  • # Interference compensation
Flameproof Thermal Conductivity Gas Analyzer <ZAFE>
Flameproof Thermal Conductivity Gas Analyzer <ZAFE>

Ideal for H2, Ar, and He measurement

  • # NEPSI Flameproof
  • # Easy-to-see LCD
  • # Auto calibration
  • # Fast response ≤ 10 s
Flameproof Thermal Conductivity Gas Analyzer <ZAFE>
Paramagnetic Oxygen Analyzer <ZAJ>

• Fast response
• Communication function
• Ideal for measuring oxygen in combustible gas

  • # Fast response ≤ 2 s
  • # Auto calibration
  • # Combustible ges
  • # Unaffected by Combustible ges
Paramagnetic oxygen analyzer <ZKG>
Paramagnetic Oxygen Analyzer <ZKG>
  • # Fast response ≤ 15 s
  • # No auxiliary gas required
  • # Combustible ges
  • # JP type approval
In-situ zirconia oxygen analyzer <ZKM-1, ZFK8>
In-Situ Zirconia Oxygen Analyzer <ZKM1, ZKM2, ZFK8>

• Insertion type
• No need for gas sampling device
• Measures O2 in incombustible gas

  • # Fast response ≤ 7 s
  • # Replaceable sensor
  • # Non-combustible gas
  • # Auto calibration
In-Situ Zirconia Oxygen Analyzer (HART communication) <ZKM-2/ZFK8>
In-Situ Zirconia Oxygen Analyzer (HART Communication) <ZKMA, ZKMB, ZFK8>

In-situ oxygen analysis requires no gas sampling device
Ideal for combustion control in industrial boilers and furnaces

  • # Fast response ≤ 7 s
  • # Replaceable sensor
  • # Non-combustible ges
  • # HART communication
In-situ zirconia oxygen analyzer for hazardous location <ZKME, ZFKE>
In-Situ Zirconia Oxygen Analyzer for Hazardous Location <ZKME, ZFKE>

• Insertion type
• No need for gas sampling device
• Measures O2 in incombustible gas

  • # Fast response ≤ 2 s
  • # Replaceable sensor
  • # TIIS & NEPSI flameproof
  • # Auto calibration
Compact NDIR gas analyzer system<ZSVF>
Compact NDIR Gas Analyzer System <ZSVF>

• Simultaneously measures up to 5 components among NOx, SO2, CO, CO2, CH4, and O2
• No need for gas sampling device

  • # Compact design
  • # Sampling system incorporated
  • # 3 components
  • # Auto calibration
Portable NDIR gas analyzer <ZSVS>
Portable NDIR Gas Analyzer <ZSVS>

Simultaneously measures up to 4 components among CO, CO2, CH4, and O2

  • # Portable
  • # Built-in pump
  • # 4 components
  • # CP calculation
NDIR gas analyzer for heat treatment furnaces <ZFG>
NDIR Gas Analyzer for Heat Treatment Furnaces <ZFG>

Continuous measurement of CO, CO2, CH4 in heat treatment furnace

  • # Panel mount
  • # Single beam NDIR
  • # 2 components
  • # CP caluculation
NDIR CO2 controller <ZFP>
NDIR CO2 Controller <ZFP>

• Measures CO2 in the air
• Analog output and alarm output

  • # Wall mount
  • # Built-in pump
  • # 4-20 mA DC output
  • # Limit alarm
Biomass gas analyzer <ZPAF>
Biomass Gas Analyzer <ZPAF>

Measures H2S, CH4, CO2, and O2 generated in biogas plants

  • # 4 components
  • # H2S, CH, CO2, O2
  • # Auto calibration
  • # Alarm output
NDIR gas analyzer (substitute for ZRG) <ZKJK>
NDIR Gas Analyzer (Substitute for ZRG) <ZKJK>

• Double-beam NDIR sensor
• Compatible to obsoleted ZRG

  • # 3 components 0-100 ppm
  • # Double beam NDIR
  • # Auto calibration
  • # Rangeability 1:25
Gas sampling devices
NDIR Gas Analyzer (Substitute for ZRH) <ZPAH and ZPA1>

• Single-beam NDIR sensor
• Compatible to obsolated ZRH

  • # 2 components
  • # Single beam NDIR
  • # Auto calibration
  • # Rangeability 1:10
NDIR Gas Analyzer (substitute for ZRJ) <ZPAJ>
NDIR Gas Analyzer (Substitute for ZRJ) <ZPAJ>

• Single-beam NDIR sensor
• Compatible to obsolated ZRJ

  • # 3 components
  • # Single beam NDIR
  • # Auto calibration
  • # Rangeability 1:10
Gas sampling devices
Gas Sampling Devices <ZB□, ZDL>

Gas extractor, pump, cooler, filter, converter, etc.

  • # Standard gas
  • # Scrubber
  • # Mist catcher
  • # Gas dryer

Related information

Gas Analyzers
Ultrasonic Flowmeters
Temperature Controllers
Pressure Transmitters
Level Transmitters