Upgrading the MICREX-SX Series Programming Support Tool

In I/O forced setting, improved to make word / double word available.

Expand to The allowable number of data monitors from 4 to 20.

Improved to switch between Japanese mode / English mode with TAG.

In the device editor, added a function to clear tags, explanations and initial values of unused devices.

In the device editor, added the printing function of the device list information and the device usage status map.

In the search / replace dialog, added tool tip display function as a tool input support for the device.

Improved to make search so that even addresses of elements of array and indirect use of members of structure.

In double writing check, added a function to detect overlapping of bit and word.

Correct the problem that capsule under T link master can not be "No equipment".

Correct the problem that PROFIBUS-DP address would result in conversion error.

Correct the problem in which inconsistent parts do not display properly in circuit printing of verification result when cross reference of in-circuit format is enabled in print detailed setting.

Correct the problem that the verify error occurs even if there is no difference in the content of POU in project verification.

Correct the problem that 8 bits or more of the SM area can not be correctly read in the optimized compile mode.

This version is supported for Windows Vista, 7, 8, 8.1, 10.

Create a new folder on the computer's hard disk.

Download the V3.0.19.7 upgrade file (StandardUpdateV30197.exe) to the new folder.

Extract the downloaded file. (The upgrade is a self-extracting file.)

The file will be extracted to the same folder.

Double click the extracted Setup.exe file.

Follow the prompts from the installer program to upgrade the software.

Standard will start up when the installation is completed. Check Info from the Help menu to make sure the version number is V3.0.19.7

Make sure that NP4H-SWN/Standard is already installed on the computer prior to upgrading the software.

Do not begin the installation if the upgrade file is not exactly the same size as the file that was downloaded.
If they are not the same size, throw all of them into the trash and download the upgrade file again.

Be sure to quit all programs that are currently running (e.g., Standard or message manager) prior to the installation.

If the installation fails due to an error, try to install the software again. If the installation fails again, re-install the previous version of Standard from the setup CD and then try to install the upgrade software again.