Upgrading the MICREX-SX Series Programming Support Tool
-
Programmable Controller PLC
- MICREX-SX SPH Series
- MICREX-SX SPF Series
-
Technical information
-
Catalog
- PLC Column
- Materials/Technical Inquiries
August 27,2018
Fuji Electric Co., Ltd.
Log in to download the upgraded version of the programming support tool.
After logging in, click the "Download documents" button to jump to the download page.
The upgraded version of the programming support tool can be downloaded from the "Download documents" page.
We would like to inform you that the Fuji Electric FA website has upgraded the software Standard of our programming support tool.
Applicable model
IEC 61131-3-compliant programming support tool: SX-Programmer
Upgrade service details
This new service gives registered users of Standard direct access to the latest version of the software through the upgrade feature on the Fuji Electric FA website.
Users can download the most recent version of the software from the website at their convenience.
Name of the upgrade file for SX-Programmer: StandardUpdateV301814.exe
Main changes in the latest version: V3.0.18.14 (August 2018)
The following functions are added, and have been improved.
-
Added mode to move attached tags to replacement address when replacing addresses.
-
Added a function to delete all tags, description, initial values in the device editor.
-
Improved to be able to switch display of address and tag in ST editor.
-
Improved to be able to switch print of address and tag in ST program.
-
Improved to print the programs in the same order as display of project tree..
-
Added a function to save the contents of the comparison result list display window to a text file.
-
Improved to display "description" text of each device on data monitor.
-
Changed "No equipment" display mark.
-
In M/F program convert, correct the problem that the index was not correctly converted.
-
Correct the problem that all conversion did not end in optimized compile mode.
-
Correct the problem that dialog of system definition parameter wizard did not correctly display on Windows 10.
-
Correct the problem that bit transfer instruction does not operate correctly on simulation.
-
Correct the problem that the tag · description disappears when opening the V2 project and changing the model to SPH 3000D.
-
This version is supported for Windows Vista, 7, 8, 8.1, 10.
History of main version upgrades
Backward compatibility
The following table shows the project compatibility for the upgrade.
Upgrading procedure
-
1.
Create a new folder on the computer's hard disk.
-
2.
Download the V3.0.18.14 upgrade file (StandardUpdateV301814.exe) to the new folder.
-
3.
Extract the downloaded file. (The upgrade is a self-extracting file.)
-
4.
The file will be extracted to the same folder.
-
5.
Double click the extracted Setup.exe file.
-
6.
Follow the prompts from the installer program to upgrade the software.
-
7.
Standard will start up when the installation is completed. Check Info from the Help menu to make sure the version number is V3.0.18.14
NOTE
To use on Windows Vista, Windows7 and Windows8, administrator's right is necessary for the installation.
Install the program according to the procedure below.
Select "Setup.exe" in the Explorer window after extracting the update file, and right-click this.
Select "As the administrator" from the right-clicking menu.
Follow the prompts from the installer program to upgrade the software.
Upgrading precautions
-
1.
Make sure that NP4H-SWN/Standard is already installed on the computer prior to upgrading the software.
-
2.
Do not begin the installation if the upgrade file is not exactly the same size as the file that was downloaded.
If they are not the same size, throw all of them into the trash and download the upgrade file again. -
3.
Be sure to quit all programs that are currently running (e.g., Standard or message manager) prior to the installation.
-
4.
If the installation fails due to an error, try to install the software again. If the installation fails again, re-install the previous version of Standard from the setup CD and then try to install the upgrade software again.
Log in to download the upgraded version of the programming support tool.
After logging in, click the "Download documents" button to jump to the download page.
The upgraded version of the programming support tool can be downloaded from the "Download documents" page.
