The gas analyser that has it all together

Achieving optimized control with our compact,
accurate, low-maintenance laser gas analyser

Monitoring exhaust gas emissions is crucial for compliance with MARPOL Annex VI regulations on sulphur emissions. For the maritime industry, continuous emission monitoring systems (CEMS) are growing in importance in line with IMO guidelines* on exhaust gas cleaning systems (EGCS). Here are some reasons to consider Fuji Electric’s in situ laser gas analyser :

*MEPC.259(68), 2015 Guidelines for Exhaust Gas Cleaning Systems

Fast, accurate analysis

Fast, accurate analysis

Fuji Electric’s laser gas analyser is capable of measuring and analysing both SO2 and CO2 in seconds. Its high-speed response time amounts to more precise, higher-resolution monitoring than conventional sampling analysers. In addition, the analyser determines in real time the state of exhaust gases after washing; thus, it optimizes the SOx scrubber’s pump operation based on alkali content in wash water. This leads to improved fuel economy and reduced operating costs.

Stable performance, longer maintenance cycle

Fuji's new laser gas analyzer eliminates all of your troubles on board by extremely easy maintenance and flexible installation

Fuji Electric offers newly developed "laser type gas analyzer" for marineexhaust gas cleaning system (SOx scrubber).  The analyzer is only1/10 size of conventional one because the probe includes necessarysampling function.  The detector unit and the interface box are also small and can be mounted on anywhere the wall at your convenience.
Maintenance spares are few to realize very low running cost. Maintenance requiredon board a ship is only filter exchange because calibration is not required except annual one.

Compactness

Compactness

As part of the world’s smallest EGCS, Fuji Electric’s laser gas analyser is one-tenth the size of a conventional sampling analyser. Occupying less space gives it a major advantage over conventional sampling analysers and facilitates both retrofitting and installation in new ships.

S-Keeper 7™: integrated modular analysis system

S-Keeper 7™: integrated modular analysis system

Also available as an alternative to our laser gas analyser is S-Keeper 7 (S-K7): a high-end extractive gas analyser for on-board continuous emission monitoring.

Learn more about S-K7 here.

Creative use of space and resources is a hallmark of ship design, and it is the guiding philosophy behind Fuji Electric’s SOx scrubber and laser gas analyser.

Fuji Electric’s solution, SaveBlue, is an exhaust gas cleaning system (EGCS) that allows continued use of heavy fuel oil (HFO): it has open-loop and closed-loop operation modes. With a compact size that facilitates ease of installation, it is suitable for both retrofitting and new builds.

Contact Us

Power Electronics Systems Energy Business Group Field Service Division
Commercial and Marketing Office Industry Department

Tel: +81-3-5435-7038 Mon.- Fri. 9:00 - 17:00 (JST)

Page Top