Features
Features
 |
High-resolution encoder |
| The FALDIC-W is installed with a high-resolution 131072 pulse encoder. Higher resolutions reduce rotation fluctuation and achieve smooth machine motion at low speeds. | |
 |
Side-by-side installation |
| Servo amplifiers can be installed side by side, which saves space required to install them in the machine enclosure. | |
 |
Servo analysis function |
| This is a tool installed in the loader to be equipped with a personal computer, which analyzes the "resonance frequencies" inherent in each machine to make effective use of the "vibration suppressing control function," the "Notch Filter," etc. | |
 |
Globally compatible |
| The FALDIC-W is compatible with "CE marking" and "UL/cUL" standards. The sequence I/O signals are also sink/source shared. | |
 |
Test operation function |
| Continuous reciprocation is supported in addition to JOG operation in a single direction. You can easily check the performance of the machine by a test operation and the effective torque by rough actual operation before preparing the host controller. | |
 |
Control power back-up function |
| A control power input for the servo amplifier is installed separately from the main power input. Even if the system cuts off the main power supply in emergencies, information on the alarm and encoder can be maintained. | |
 |
Monitor output function |
| An analog monitor output function is equipped on the front of the servo amplifier. Connect a special connector to it to observe signals. Two signals can be observed from the return speed, torque command, positional deviation, etc. | |
