 |
 |
Item |
Specifications |
| Type (FRN□□□G1E-4□) |
75 |
90 |
110 |
132 |
160 |
200 |
220 |
280 |
315 |
355 |
400 |
500 |
630 |
| Nominal applied motor [kW] (*1) |
90 |
110 |
132 |
160 |
200 |
220 |
280 |
355 |
400 |
450 |
500 |
630 |
710 |
| Output ratings |
Rated capacity [kVA] (*2)
|
134 |
160 |
192 |
231 |
287 |
316 |
396 |
495 |
563 |
640 |
731 |
891 |
1044 |
| Rated voltage [V] (*3) |
Three-phase 380 to 480V (with AVR) |
| Rated Current [A] |
176 |
210 |
253 |
304 |
377 |
415 |
520 |
650 |
740 |
840 |
960 |
1170 |
1370 |
| Overload capability |
120% for 1min |
| Rated frequency [Hz] |
50, 60Hz |
| Input ratings |
Main circuit power
Phases, voltage, frequency
|
Three-phase 380 to 440V/50Hz
Three-phase 380 to 480V/60Hz
|
Auxiliary control power input
Phases, voltage, frequency |
Single-phase 380 to 440V, 50/60Hz
|
Auxiliary power input for fan
Phases, voltage, frequency (*5)
|
Single-phase 380 to 440V/50Hz
Single-phase 380 to 480V/60Hz
|
| Voltage, frequency variations |
Voltage:+10 to -15% (Voltage unbalance:2% or less (*6)) Frequency:+5 to -5% |
| Rated current [A] (*7) |
with DCR |
164
|
210 |
238 |
286 |
357 |
390 |
500 |
628 |
705 |
789 |
881 |
1115 |
1256 |
| without DCR |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Required power supply capacity [kVA] (*8)
|
with DCR |
114 |
140 |
165 |
199 |
248 |
271 |
347 |
436 |
489 |
547 |
611 |
773 |
871 |
| Braking |
Torque [%] (*9)
|
7 to 12% |
Braking transistor
|
- |
Min. ohmic value [Ω]
Torque [%]
|
- |
| DC injection braking |
Starting frequency:0.0 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level:0 to 80% |
EMC filter
|
EMC standard compliance: Category C3 is only emission and 2nd Env. is immunity. (EN61800-3:2004) |
DC reactor (DCR) (*10)
|
Standard accessory |
Applicable safety standards
|
UL508C, C22.2No.14 (pending), EN61800-5-1:2003 |
Enclosure (IEC60529)
|
IP00 open type, UL open type
|
Cooling method
|
Fan cooling |
| Weight/Mass [kg] |
43 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(*1) |
Fuji's 4-pole standard motor |
(*2) |
Rated capacity is calculated by assuming the output rated voltage as 220V for three-phase 200V series and 440V for three-phase 400V series. |
(*3) |
Output voltage cannot exceed the power supply voltage. |
(*5) |
The auxiliary power input is used as an AC fan power input when combining the unit such as high power factor PWM converter with power regenerative function. (Generally not used.) |
(*6) |
Interphase voltage unbalance ratio[%] = (max. voltage [V] - min. voltage [V])/3-phase average voltage [V]×67(See IEC61800-3.)
Use the DC reactor (ACR: optional) when used with 2 to 3 % of unbalance ratio. |
(*7) |
The value is calculated on assumption that the inverter is connected with a power supply capacity of 500kVA (or 10 times the inverter capacity if the inverter capacity exceeds 50kVA) and %X is 5%. |
(*8) |
Obtained when a DC reactor (DCR) is used. |
(*9) |
Average braking torque obtained by use of a motor. (Varies with the efficiency of the motor.) |
(*10) |
The 55kW DC reactor (DCR) is optional with HD spec, and is provided as a standard accessory with LD spec. |
|
| |
