Three-phase 200V series

Item Specifications Type (FRN□□□G1S-2□) 0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 Nominal applied motor [kW] (*1) 0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 Output ratings Rated capacity [kVA] (*2) 1.1 1.9 3.0 4.2 6.8 10 14 18 24 28 34 45 55 68 81 107 131 Rated voltage [V] (*3) Three-phase 200 to 240V (with AVR) Three-phase 200 to 230V (with AVR) Rated Current [A] 3 5 8 11 18 27 37 49 63 76 90 119 146 180 215 283 346 Overload capability 150% for 1min, 200% for 3.0s Rated frequency [Hz] 50, 60Hz Input ratings Main circuit power Phases, voltage, frequency Three-phase 200 to 240V, 50/60Hz Three-phase 200 to 220V, 50Hz Three-phase 200 to 230V, 60Hz Auxiliary control power input Phases, voltage, frequency - Single-phase 200 to 240V, 50/60Hz Single-phase 200 to 230V, 50/60Hz Auxiliary power input for fan Phases, voltage, frequency (*5) - Single-phase 200 to 220V, 50Hz Single-phase 200 to 230V, 60Hz Voltage, frequency variations Voltage:+10 to -15% (Voltage unbalance:2% or less (*6)) Frequency:+5 to -5% Rated current [A] (*7) with DCR 1.6 3.2 6.1 8.9 15 21.1 28.8 42.2 57.6 71.0 84.4 114 138 167 203 282 334 without DCR 3.1 5.3 9.5 13.2 22.2 31.5 42.7 60.7 80.1 97.0 112 151 185 225 270 - - Required power supply capacity [kVA] (*8) with DCR 0.6 1.2 2.2 3.1 5.2 7.4 10 15 20 25 30 40 48 58 71 98 116 Braking Torque [%] (*9) 150% 100% 20% 10 to 15% Braking transistor Built-in - Min. ohmic value [Ω] Torque [%] 100 180% 40 180% 24 180% 16 180% 12 180% 8 180% 6 180% 4 180% - Built-in braking resistance 100Ω 40Ω 20Ω - Braking time[s] 5s - %ED 5 3 5 3 2 3 2 - DC injection braking Starting frequency:0.0 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level:0 to 100% DC reactor (DCR) (*10) Optional Standard accessory Applicable safety standards UL508C, C22.2No.14 (pending), EN61800-5-1:2003 Enclosure (IEC60529) IP20 (IEC60529) closed type, UL open type (UL 50) IP00 open type, UL open type Cooling method Natural cooling Fan cooling Weight/Mass [kg] 1.7 2 2.8 3 3 6.5 6.5 5.8 9.5 9.5 10 25 32 42 43

(*1)	Fuji's 4-pole standard motor.
(*2)	Rated capacity is calculated by assuming the output rated voltage as 220V for three-phase 200V series and 440V for three-phase 400V series.
(*3)	Output voltage cannot exceed the power supply voltage.
(*4)	When using the inverter in the ambient temperature of 40°C or over and with carrier frequency at 3kHz or higher, adjust the current under continuous running to be the value in ( ) or lower by controlling the load.
(*5)	The auxiliary power input is used as an AC fan power input when combining the unit such as high power factor PWM converter with power regenerative function. (Generally not used.)
(*6)	Interphase voltage unbalance ratio[%] = (max. voltage [V] - min. voltage [V])/3-phase average voltage [V]×67(See IEC61800-3.) Use the DC reactor (ACR: optional) when used with 2 to 3 % of unbalance ratio.
(*7)	The value is calculated on assumption that the inverter is connected with a power supply capacity of 500kVA (or 10 times the inverter capacity if the inverter capacity exceeds 50kVA) and %X is 5%.
(*8)	Obtained when a DC reactor (DCR) is used.
(*9)	Average braking torque obtained by use of a motor. (Varies with the efficiency of the motor.)
(*10)	The 55kW DC reactor (DCR) is optional with HD spec, and is provided as a standard accessory with LD spec.