The single cylinder non-reheat steam turbines (FET Series) are applicable up to 240MW and for both combined cycle and conventional fossil power plants.
This FET steam turbine is reliably designed with the combination of the standardized parts, bearing, main steam inlet, intermediate section and single exhaust block. This turbine can be used both condensing and backpressure application, and also can accommodate the controlled extractions and/or admission capability. The applicable main steam conditions are up to 13.0MPa / 538 deg.C.
The generator applicable for this unit is the synchronous machine of the standardized design and totally enclosed water-to-air cooled (TEWAC) type. The generator can be designed, manufactured and tested in accordance with any of IEC, JEC and ANSI Standards.
The two (2) cylinder reheat condensing steam turbines (KN Series) are applicable up to 400MW and both for combined cycle and conventional fossil power plants.
This KN steam turbine is of the standardized design of two (2) cylinder reheat condensing turbine with double exhaust flows. The applicable steam conditions are as follows;
| Main steam conditions: |
up to 16.5 MPa /566 deg.C |
| Reheat steam temperature: |
up to 566 deg.C |
The generator applicable for this unit is the synchronous machine of the standardized design and totally enclosed water-to-air cooled (TEWAC) type or a hydrogen cooled type. The TEWAC machine is applicable up to 300 MVA. The generator can be designed, manufactured and tested in accordance with any of IEC, JEC and ANSI Standards. .
4 Units