SPH3000 | SPH3000MM | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Type | NP1PU-048E | NP1PU-256E | NP1PU2-048E | NP1PU2-256E | ||||||
Control system | Stored program, Cyclic scanning system (default task), periodic task, event task | |||||||||
Input / Output connection method | Direct connection I/O (SX bus), remote I/O (DeviceNet, OPCN-1, and other remote I/O links) | |||||||||
I/O Control system | SX bus: Tact synchronization refresh. Remote I/O link: Refresh at 10-ms ixed intervals (not synchronized with scan) | |||||||||
CPU | 32-bit RISC processor | 32-bit RISC processor×3 | ||||||||
Programming language | SX bus: Tact synchronization refresh. Remote I/O link: Refresh at 10-ms ixed intervals (not synchronized with scan) | |||||||||
Instruction execution speed | Sequence instruction | 9ns or more/instruction | ||||||||
Applied instruction | 8ns or more/instruction | |||||||||
NO. of I/O points | 8,192 points | 8,192 points | 139,264 points | 139,264 points | ||||||
SX bus | 8,192 points | 8,192 points | 8,192 points | 8,192 points | ||||||
E-SX bus0/E-SX bus1 | - | - | 65,536 points | 65,536 points | ||||||
User memory | 353 Kwords | 2,561 Kwords | 1234,5 Kwords | 5650,5 Kwords | ||||||
Program memory | 98,304 words | 524,288 words | 196,608 words | 1,048,576 words | ||||||
49,152 steps | 262,144 steps | 98,304 steps | 524,288 steps | |||||||
SX bus | 98,304 words | 524,288 words | - | - | ||||||
49,152 step | 262,144 step | - | - | |||||||
E-SX bus0/E-SX bus1 | - | - | 98,304 words | 524,288 words | ||||||
- | - | 49,152 steps | 262,144 steps | |||||||
Data memory | 263,168 words | 2,098,176 words | 1,067,520 words | 4,737,536 words | ||||||
SX bus | 263,168 words | 2,098,176 words | 132,608 words | 132,608 words | ||||||
I/O memory | 512 words | 512 words | 512 words | 512 words | ||||||
Non-retain memory | 98,304 words | 1,703,936 words | 65,536 words | 65,536 words | ||||||
Retain memory | 40,960 words | 237,568 words | 65,536 words | 65,536 words | ||||||
User FB memory | 40,960 words | 73,728 words | - | - | ||||||
System FB memory | 81,920 words | 81,920 words | - | - | ||||||
Edge detection | 5,120 points | 5,120 points | - | - | ||||||
Counter | 1,280 points | 1,280 points | - | - | ||||||
Integrating timer | 640 points | 640 points | - | - | ||||||
Timer | 2,560 points | 2,560 points | - | - | ||||||
Others | 40,960 words | 40,960 words | - | - | ||||||
System memory | 512 words | 512 words | 512 words | 512 words | ||||||
Common memory | - | - | 512 words | 512 words | ||||||
E-SX bus0/E-SX bus1 | - | 2,098,176 words | 467,456 words | 2,302,464 words | ||||||
I/O memory | - | - | 4,096 words | 4,096 words | ||||||
Non-retain memory | - | - | 98,304 words | 1,703,936 words | ||||||
Retain memory | - | - | 40,960 words | 237,568 words | ||||||
User FB memory | - | - | 172,032 words | 204,800 words | ||||||
System FB memory | - | - | 147,456 words | 147,456 words | ||||||
Edge detection | - | - | 10,240 points | 10,240 points | ||||||
Counter | - | - | 6,144 points | 6,144 points | ||||||
Integrating timer | - | - | 1,024 points | 1,024 points | ||||||
Timer | - | - | 6,144 points | 6,144 points | ||||||
Others | - | - | 45,056 words | 45,056 words | ||||||
System memory | - | - | 4,608 words | 4,608 words | ||||||
Available basic data type *1 | BOOL, INT, DINT, UINT, UDINT, REAL, TIME, DATE, TOD, DT, STRING, WORD, DWORD | |||||||||
No. of tasks | SX bus Default tasks (Cyclic scanning): 1, Periodic tasks: 4, Event tasks: 4 (Total of 4 tasks when Periodic task is used) |
E-SX bus 0/E-SX bus1 Default tasks (Cyclic scanning): 1, Periodic tasks: 4, Event tasks: 4 (Total of 4 tasks when Periodic task is used) |
||||||||
No. of POUs in program | 2000 (including POUs in the library) | |||||||||
Interface | User ROM card | ○ SD memory card |
||||||||
USB *2 | ○ | |||||||||
Ethernet *3 | ○ | |||||||||
Diagnostic function | Self-diagnosis (memory check, ROM sum check), System coniguration supervising, Module fault monitoring | |||||||||
Security function | Set limits to download/upload of the projects, reference, and clear etc,. by the password. | |||||||||
Calendar | Up to 31 Dec. 2069 23:59:59 27sec/month (when active) When multi-CPU system is used, time is synchronized. |
|||||||||
Battery backup | Backup range: Data memory, calendar IC memory Battery used: Lithium primary battery
|
|||||||||
Memory backup by flash ROM (contained in CPU module) | Application programs, system deinitions, and ZIP files can be saved in the flash memory built in the CPU. | |||||||||
Memory backup by user ROM card (optional) | Application programs, system deinitions, zip files, compressed projects and User's data can be saved in user ROM card (compact flash card). | |||||||||
No. of occupied slots | 1 slot | 2 slots | ||||||||
Internal current consumption | 24V DC 200mA or less | 24V DC 360mA or less | ||||||||
Mass | Approx. 220g | Approx. 420g |
Note: | * 1 This depends on each instruction. * 2 Specification of USB Applicable standard of USB: USB1.1 USB-miniB type (NP1PU-048E/256E, NP1PU2-048E/256E). * 3 The Ethernet interface is 10Base-T/100Base-TX. |
![]() |
![]() |
![]() |
![]() |
![]() |
Digital input unit | Analog input unit | High-speed counter | Inter-face module |
Auxiliary power supply unit |
It is a separate mounting type I/O unit that can be directly connected to the E-SX bus.
• Digital input unitItem | Specifications |
---|---|
Type | NU2X3206-W |
Input method | Sink/source in common use 32-point (8-point common x 4 circuits) |
Input voltage | Rating: 24V DC, Maximum acceptable: 30V DC, Acceptable ripple rate: 5% or less |
Power supply method | E-SX bus cable (24V DC) |
Rated current | 7mA (at 24V DC) |
Operating voltage | OFF to ON: 15 to 30V ON to OFF: 0 to 5V |
Input delay time | OFF to ON: 25μs or less (hard filter time) + (soft filter time) ON to OFF: 75μs or less (hard filter time) + (soft filter time) |
Isolation method | Photocoupleer insulation |
Extemal wire connection | Removable M3 screw terminal block |
Intemal current consumption | Operating: 260mA or less, Bypassing: 93mA |
Dimension (W×H×D) [mm] | 240 x 65 x 60 (except DIN rail mounting protrusions) |
Mass | Approx. 430g |
Item | Specifications |
---|---|
Type | NU2Y32T09P6 |
Output method | Transistor sink 32 points (8-point common x 4 circuits) |
Output voltage | Rating: 24V DC, Allowable: 10.8V to 30V DC |
Power supply method | E-SX bus cable (24V DC) |
Max. load current | 0.6A/ point 4A/ common |
Response time | OFF to ON: 10μs or less ON to OFF: 200μs or less |
Output protection | Overload protection: Built-in fuse (common unit 4 fuses) Surge suppression: Varistor (total 32 points) |
Isolation method | Photocoupler |
Extemal wire connection | Removable M3 screw terminal block |
Intemal current consumption | Operating: 300mA or less, Bypassing: 93mA |
Dimension (W×H×D) [mm] | 240 x 65 x 60 (except DIN rail mounting protrusions) |
Mass | Approx. 410g |
It is a separate mounting type analog unit that can be directly connected to the E-SX bus.
・Analog input unitItem | Specifications | |||
---|---|---|---|---|
Type | NU2AXH2-MR | |||
Input | Multi-range 2 channels | |||
Power supply method | E-SX bus cable (24V DC) | |||
Signal range | 0 to 10V 0 to 5V 1 to 5V |
-5 to 5V -10 to 10V |
-20 to +20mA | 0 to 20mA 4 to 20mA |
Digital output value (INT type) | 0 to 20000 | -20000 to +20000 | 0 to 20000 | |
Resolution | 15bit | |||
Measurement accuracy | ± 0.1% of F.S.R. (Ta = 23℃ ±5℃), Setting moving average for 8 data or more | |||
Converting speed | 25μs/2 channels | |||
Isolation method | Between analog input terminal and FG: Photo coupler and transformer insulated Between analog input terminal and channel: Transformer insulated |
|||
Extemal wire connection | Removable M3 screw terminal block | |||
Intemal current consumption | Operating: 300mA or less, Bypassing: 93mA | |||
Dimension (W×H×D) [mm] | 165 x 65 x 60 (except DIN rail mounting protrusions) | |||
Mass | Approx. 360g |
Item | Specifications | ||||
---|---|---|---|---|---|
Type | NU2AYH2V-MR | ||||
Output | Voltage multi-range 2 channels | ||||
Power supply method | E-SX bus cable (24V DC) | ||||
Signal range | -10 to +10V | -5 to +5V | 0 to 10V | 0 to 5V | 1 to 5V |
Digital output value (INT type) | -20000 to +20000 | 0 to 20000 | |||
Max. resolution | 0.5mV | 0.25mV | 0.5mV | 0.25mV | 0.2mV |
Measurement accuracy | ±0.1% of F.S.R. (Ta=23℃±5℃) | ||||
Converting speed | 25μs/2 channels | ||||
Isolation method | Between analog output terminal and FG: Photo coupler and transformer insulated Between analog output terminal and channel: Transformer insulated |
||||
Extemal wire connection | Removable M3 screw terminal block | ||||
Intemal current consumption | Operating: 300mA or less, Bypassing: 93mA | ||||
Dimension (W×H×D) [mm] | 165 x 65 x 60 (except DIN rail mounting protrusions) | ||||
Mass | Approx. 350g |
It is a separate mounting type high-speed counter that can be directly connected to the E-SX bus.
Item | Specifications | |||
---|---|---|---|---|
Type | NU2F-HC2 | |||
Input | 90-degree phase difference, 2-phase signal, 2-channel | |||
Power supply method | E-SX bus cable (DC24V) | |||
Signal type | Line driver | Open collector | Open collector | Open collector |
Rated voltage | 5V DC | 5V DC | 12V DC | 24V DC |
Response frequency | 1MHz | 250KHz | ||
Max. input frequency | 4Mbps | 1Mbps | ||
Counting range | Signed 32-bit binary (-2147483648 to + 2147483647) | |||
Counting operation mode | Linear/ring operation, gate operation, preset operation Latch operation, Z-phase detection operation |
|||
Isolation method | Photocoupleer insulation | |||
Extemal wire connection | Removable M3 screw terminal block | |||
Intemal current consumption | Operating: 250mA or less, Bypassing: 80mA or less | |||
Dimension (W×H×D) [mm] | 240 x 65 x 60 (except DIN rail mounting protrusions) | |||
Mass | Approx. 500g |
It can be mounted on the conventional SPH base board so that the SX bus connection device which is controlled by this module can be used as a module on the E-SX bus.
Item | Specifications |
---|---|
Type | NP1L-RU1 |
No. of connections | Maximum 8 units/configuration |
SX bus control | SX bus system control of self-administration station |
SX bus tact period | 1, 1.5, 2, 3, 4, 5 (default), 6, 7, 8, 9, 10ms |
Extended SX bus | Maximum 512 words (I/O extension disallowed) |
SX bus controllable module | Direct connection I/O module, POD, inverter and servo (CPU module, communication module and remote I /O module disallowed) |
Date exchange | I/O data and messages between the higher-level E-SX bus and the lower-level SX bus |
Fail-soft-RAS | RAS degeneracy administration of the SX bus system of the selfadministration station Notification to the high-level E-SX bus |
USB loader connection | Connection of the program support tool |
Module-connectable base board | Standard and high-performance base: NP1B □ - □□ Base with the station number settings function: NP1B □ - □□ S (Base with the live wire removal function: NP1B □ - □□ D disallowed) |
Intemal current consumption | 360mA or less |
Mass | Approx. 420g |
It is a separate mounting auxiliary unit to supply 24V DC to the E-SX bus cable and to connect 5 or more units which are compatible with the E-SX bus to the E-SX bus connector of the CPU module.
Item | Specifications |
---|---|
Type | NU2V-PA1 |
No. of connections | Maximum 10 units on the E-SX bus (maximum 8m between main units) This one unit for 5 E-SX bus devices as a guide |
Rated input voltage | 24V DC (external power supply is used) *1 |
Voltage tolerance | 22.8 to 27V DC |
Overcurrent detection | When an overcurrent is detected, the 24V DC supply is stopped. To restart the power supply, press the reset switch. |
Intemal current consumption | No load: 70mA or less, 10 units connected: 1A or less |
Dimension (W×H×D) [mm] | 50×95×95 |
Mass | Approx. 150 g |