|
 |
Item |
Specifications |
Type (FRN□□□G1S-4□) |
75 |
90 |
110 |
132 |
160 |
200 |
220 |
280 |
315 |
355 |
400 |
500 |
630 |
Nominal applied motor [kW] (*1) |
75 |
90 |
110 |
132 |
160 |
200 |
220 |
280 |
315 |
355 |
400 |
500 |
630 |
Output ratings |
Rated capacity [kVA] (*2)
|
114 |
134 |
160 |
192 |
231 |
287 |
316 |
396 |
445 |
495 |
563 |
731 |
891 |
Rated voltage [V] (*3) |
Three-phase 380 to 480V (with AVR) |
Rated Current [A] |
150 |
176 |
210 |
253 |
304 |
377 |
415 |
520 |
585 |
650 |
740 |
960 |
1170 |
Overload capability |
150% for 1min, 200% for 3.0s
|
Rated frequency [Hz] |
50, 60Hz |
Input ratings |
Main circuit power
Phases, voltage, frequency
|
Three-phase 380 to 480V, 50Hz
Three-phase 380 to 480V, 60Hz |
Auxiliary control power input
Phases, voltage, frequency |
Single-phase 380 to 480V, 50/60Hz
|
Auxiliary power input for fan
Phases, voltage, frequency (*5)
|
Single-phase 380 to 440V, 50Hz
Single-phase 380 to 480V, 60Hz |
Voltage, frequency variations |
Voltage:+10 to -15% (Voltage unbalance:2% or less (*6)) Frequency:+5 to -5% |
Rated current [A] (*7) |
with DCR |
138 |
164 |
210 |
238 |
286 |
357 |
390 |
500 |
559 |
628 |
705 |
881 |
1115 |
without DCR |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Required power supply capacity [kVA] (*8)
|
with DCR |
96 |
114 |
140 |
165 |
199 |
248 |
271 |
347 |
388 |
436 |
489 |
611 |
773 |
Braking |
Torque [%] (*9)
|
10 to 15% |
Braking transistor
|
- |
Min. ohmic value [Ω] Torque [%] |
- |
DC injection braking |
Starting frequency:0.0 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level:0 to 100% |
DC reactor (DCR) (*10) |
Standard accessory
|
Applicable safety standards
|
UL508C, C22.2No.14 (pending), EN61800-5-1:2003 |
Enclosure (IEC60529)
|
IP20(IEC60529) closed type, UL open type (UL 50) |
Cooling method
|
Fan cooling |
Weight/Mass [kg] |
42 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
(*1) |
Fuji's 4-pole standard motor
|
(*2) |
Rated capacity is calculated by assuming the output rated voltage as 220V for three-phase 200V series and 440V for three-phase 400V series. |
(*3) |
Output voltage cannot exceed the power supply voltage. |
(*5) |
The auxiliary power input is used as an AC fan power input when combining the unit such as high power factor PWM converter with power regenerative function. (Generally not used.)
|
(*6) |
Interphase voltage unbalance ratio[%] = (max. voltage [V] - min. voltage [V])/3-phase average voltage [V]×67(See IEC61800-3.) Use the DC reactor (ACR: optional) when used with 2 to 3 % of unbalance ratio.
|
(*7) |
The value is calculated on assumption that the inverter is connected with a power supply capacity of 500kVA (or 10 times the inverter capacity if the inverter capacity exceeds 50kVA) and %X is 5%.
|
(*8) |
Obtained when a DC reactor (DCR) is used.
|
(*9) |
Average braking torque obtained by use of a motor. (Varies with the efficiency of the motor.)
|
(*10) |
The 55kW DC reactor (DCR) is optional with HD spec, and is provided as a standard accessory with LD spec. |
|
 |
|