Kelestarian

Menguruskan Bahan Kimia

Bahan kimia mempunyai sifat yang wujud yang menawarkan faedah yang luar biasa. Walau bagaimanapun, pada masa yang sama, bahan kimia boleh membahayakan kesihatan manusia dan membebankan alam sekitar jika ia disalahgunakan.
Satu elemen Wawasan Alam Sekitar 2050 Fuji Electric ialah merealisasikan masyarakat yang harmoni dengan alam semula jadi. Untuk mencapai elemen visi ini, kami mengamalkan pengurusan bahan kimia yang sesuai sambil berusaha untuk mengurangkan penggunaannya bagi mengelakkan kerosakan kepada ekosistem.

Mengurus dan Mengurangkan Penggunaan Bahan Kimia

Fuji Electric meneruskan usahanya untuk mengurangkan pelepasan bahan kimia alam sekitar yang ditentukan oleh sistem Daftar Pelepasan dan Pemindahan Pencemaran (PRTR)*1 dan pelepasan atmosfera sebatian organik meruap (VOC) mengikut pelan tindakan sukarela yang dikemukakan oleh empat organisasi industri elektrik dan elektronik Jepun*2 berdasarkan Akta Kawalan Pencemaran Udara.

Mulai tahun 2012, kami juga telah menjalankan tinjauan pelepasan di tapak luar negara kami, dan sejak itu kami telah berusaha untuk mengurangkan pelepasan di seluruh dunia.

In fiscal 2024, the actual atmospheric emissions of PRTR-designated substances were 387 tons. Additionally, the actual atmospheric emissions of VOCs were 509 tons, achieving the global emission target of less than 800 tons.

Jumlah Pelepasan Bahan Ditetapkan PRTR dan Pelepasan Atmosfera VOC

Material Balance of PRTR-Designated Substances in Japan, in FY2024

Menguruskan Bahan Kimia yang Terkandung dalam Produk

Di Fuji Electric, kami beroperasi dalam pelbagai bidang—termasuk semikonduktor, penjanaan kuasa dan kuasa elektrik, infrastruktur perindustrian dan sosial, serta pengedaran makanan dan minuman—dan kami menyediakan produk kami ke negara di seluruh dunia.

Produk kami mengandungi pelbagai bahan kimia, dan kami berusaha untuk memastikan pelanggan kami boleh menggunakannya dengan selamat dan dengan ketenangan fikiran. Kami mematuhi pelbagai undang-undang dan peraturan yang mengawal penggunaan bahan kimia di seluruh dunia seperti yang ditetapkan dalam polisi di bawah.

・Dasar Fuji Electric mengenai Bahan Terkawal yang Terkandung dalam Produk

"Semua produk mematuhi semua peraturan alam sekitar yang berkaitan"

Untuk mengikuti dasar ini, kami berhasrat untuk meminimumkan risiko bahan kimia dengan menghapuskan atau menggantikan secara sistematik (setakat yang mungkin dan sebelum tarikh akhir kawal selia) bahan kimia yang terkandung dalam produk dan digunakan dalam proses.

Contoh undang-undang dan peraturan utama—dan negara serta wilayah di mana ia berkuat kuasa—yang mana dasar ini digunakan boleh didapati dalam jadual di bawah.

・Alat Pengurusan: Garis Panduan Perolehan Hijau dan Pangkalan Data Bahagian

To ensure proper management of environmental regulatory substances contained in Fuji Electric's products, we have established the Green Procurement Guidelines. In cooperation with our supply chain partners, we collect information on the chemical substance contents of our products. The Green Procurement Guidelines were revised in December 2024 to reflect new regulatory substances. The obtained information is managed through our internal parts database.

・Organisasi aktiviti pematuhan bahan terkawal

Untuk mengurus dan berkongsi maklumat tentang bahan kimia yang terkandung dalam produk Fuji Electric, kami telah menubuhkan Kumpulan Kerja Bahan Dikawal Alam Sekitar pada tahun 2003, yang terdiri daripada ahli reka bentuk dari setiap unit produk sebagai organisasi keratan rentas seluruh syarikat yang meneruskan aktivitinya hingga ke hari ini. Pada masa ini, mesyuarat biasa diadakan dua kali setahun.

・Pencapaian percubaan Fuji Electric untuk Tarikh

1. In compliance with the RoHS Directive, we have taken the following measures:
- To develop lead-free solder and apply it to products (Completed by 2006)
- To replace lead, cadmium, and mercury in paints, alloys, and electronic materials (Completed by 2006)
- To develop hexavalent chromium-free technologies for steel sheets, plating, and paints (Completed by 2006)
- To replace certain bromine-based flame retardants (Completed by 2006)
- To replace four specific phthalic esters in cables, capacitors, rubber parts, etc. (Completed by the start of the regulations in 2019 and 2021)
A total of 35 X-ray fluorescence analyzers were installed between 2003 and 2004 at all domestic and overseas component factories to perform regular inspections of incoming parts.

2. In compliance with the REACH Regulation, we have taken the following measures:
In order to ensure provision of information on chemical substances contained in products as required by REACH, we have established and revised our Green Procurement Guidelines and built a database of parts and materials, and continue to obtain information from upstream suppliers namely suppliers of parts and materials and provide information to downstream companies namely distributors of our products.

3. In compliance with laws on fluorocarbons namely Montreal Protocol, we have taken the following measures:
To develop and apply CFC-free and GWP 1 refrigerants (R1234yf) for vending machines (Completed by 2011, ahead of the rest of the industry). In fiscal 2011, We developed Vending machines which use of CFC-free refrigerants or refrigerants GWP less than 1 as mass products ahead of the rest of industry

4. In compliance with TSCA PIP (3:1) PBT, we have taken the following measures:
We have completed replacing the materials and components containing the regulated substance in our products by the regulatory deadline of October 31, 2024.

5. In compliance with the EU’s PFAS Restriction Proposal, we have taken the following measures:
When the EU PFAS Restriction Proposal was announced in February 2023, it established a six-month consultation period that ran until September 2023. We submitted comments on all products, parts, and materials affected by the proposal.
With regard to proprietary parts and materials, we made joint submissions with materials manufacturers; with regard to shared parts and materials, we submitted comments through the relevant industrial groups. We will closely watch the future developments as this Restriction is expected to be added to the REACH Regulation.

6. In compliance with the Act on the Regulation of Manufacture and Evaluation of Chemical Substances, with regard to Dechlorane Plus we have taken the following measures:
Decrolan Plus was added to the list of prohibited substances under the Chemicals Control Act on February 18, 2025.
We have completed replacing parts and materials containing Decrolan Plus used in applications subject to regulations. For applications not regulated by law, replacement is also in progress.

7. In compliance with Mineral Oil Ink Regulations (France), we have taken the following measures:
Replacement of inks used in printed materials for France with regulated mineral oil inks has been completed.

・Pengurusan kilang di luar negara

Kami mengekalkan pengurusan yang betul bagi bahan terkawal yang terkandung dalam produk di kilang luar negara kami melalui perolehan alat ganti dan bahan serta pengurusan pembuatan berdasarkan spesifikasi reka bentuk kilang induk di Jepun.

Halaman Atas