Servo amplifier
The installation area is reduced by 25 to 30% when compared with our conventional model.

Servomotor
The overall length is reduced by about 15% when compared with our conventional model.

The servo amplifier can be installed side by side without a clearance. The installation space in the control panel of the machine is reduced.
* 80% ED rating in case of close installation There is no limitation if 5mm or a larger clearance is placed.

Close installation can be made even if the ABS backup battery is installed.
The battery can be replaced without difficulty while the servo amplifier is left installed.

The designed life time of the battery is about 35000 hours.
(Retention time with power turned off)

The standard servomotor model is compatible with IP67* and it can be used in the environment susceptible to water or dust splashes.
* Except for shaft-through part and connectors

Because compatibility with FALDIC-α,-β Series servomotors is assured, the new amplifier meets requirements for replacement of existing products flexibly.
(Compatibility with individual products is planned.)

The amplifier can be connected to PC using a commercially available USB cable (B-type).

Easy tuning and profile operation
Machine and servo adjustments are possible even without completing the controller program, substantially reducing machine setup time.

Sequence test mode
the controller program can be run even if machine setup is not complete, improviding program debugging efficiency.

Incidental alarm functions
when an alarm occurs, data such as the speed and torque at the time of the alarm is displayed together with the alarm content, facilitating accurate analysis of alarm causes.

Life warning function
Provides the user with warnings on the life of servo amplifier consumable parts.

• Battery life warning
• Main circuit capacity life warning
• Cooling fan life warning