FUJI ELECTRIC Programmable Operation Display (POD) UG Series Information on Version Upgrade of UG00S Screen Programming Software

1. Target Models   Screen programming software for POD UG Series

Model Specification Latest version UG00S-CWV3 Screen programming software, Japanese/English version V3.2.23.0

2. Major Revisions
(1)Fuji Electric FA Components & Systems PLC ladder monitor support
	The ladder programs for FUJI PLCs can now be monitored on a POD screen by mounting the ladder monitor expansion memory cassette (UG30P-LM) to the POD. SX-Programmer Standard is used for the PLC loader. - Applicable PLCs : MICREX-SX SPH (single CPU), MIXREX-SX SPB, FLEX-PCN
(2)Name change for temperature controller network-compatible models The selectable model names for the F-MPC series manufactured by Fuji Electric FA have been changed as follows.
	F-MPC Series ---> F-MPC Series / FePSU
(3)Model supporting temperature control networks has been added.
	Maker Model SIEMENS Micromaster400
(4)Connectable PLCs have been added.
	Maker Model TOSHIBA PROSEC T series (Ethernet)

3. Revision History (Major Revisions)
(1)V3.2.22.0
	(a)UG230P-AP adapter unit support UG230 has supported UG230P-AP adapter unit (scheduled to be released in June 2005), making it possible to mount the UG30 communications unit (UG03I-). (b)New models compatible with printers added Maker Model Interface EPSON PM-A850 USB PM-D750 USB PM-A870 USB PM-D770 USB PM-D1000 USB (c)PLCs with ladder monitor function added Maker Model MITSUBISHI ELECTRIC MELSEC-Q Ethernet (d)Model supporting temperature control networks has been added. Maker Model FUJI ELECTRIC FA F-MPC(FePSU,F-MPC04S) SHIMADEN Shimaden Standard Protocol YAMAHA MOTOR RCX142 (e)Connectable PLCs have been added. Maker Model YASKAWA ELECTRIC MP2300(Modbus TCP/IP)

(2) V3.2.21.0
	(a) Access memory expansion supported for Hitachi HIDIC-S10V PLCs via Ethernet It is possible to access memory in all S10V devices. (b) Default destination node number changed for Izumi (IDEC) MICRO3 and MICRO Smart PLCs The default destination node number in the communications parameters has been changed from 1 to 0. (c) PLCs with ladder transfer function added Maker Model MITSUBISHI ELECTRIC MELSEC-FX3UC CPU

(3) V3.2.20.0
	(a) UG30 compatible with Ethernet 100BASE-TX communications Ethernet 100BASE-TX is now supported by the UG30 (Ethernet standard-provided type) and UG230. UG03I-E and UG03I-E2 communications units are not available. (b) DeviceNet communications unit support Screen editor software has supported DeviceNet communications unit (scheduled to be released in May 2005). (c) Simple POD CN1 port supports Modbus RTU (free format). (d) Model with PLC 2-way connection capability added. Maker Model MITSUBISHI ELECTRIC MELSEC-Q (Multi CPU) MELSEC-Q CPU (Multi CPU) (e) PLCs with ladder monitor function added Maker Model MITSUBISHI ELECTRIC MELSEC-Q CPU (Multi CPU) (f) Model with PLC 2-way connection capability added. Maker Model SUMSUNG SECNET (g) Model supporting temperature control networks has been added. Maker Model HONEYWELL Universal Modbus RTU (h) Connectable PLCs have been added. Maker Model HONEYWELL Universal Modbus RTU Universal Modbus RTU TCP/IP MITSUBISHI ELECTRIC MELSEC-Q CPU (Multi CPU)

(4) V3.2.19.0
	(a) Windows Font Functions Added Warning functions have been added that provide warnings when an attempt to edit screen data using Windows fonts is made in a personal computer in which a specified font has not been installed. ・Searches for uninstalled fonts when the file is opened, and outputs a warning message. ・Detects uninstalled fonts during the error check and sends a warning. ・Displays uninstalled fonts in red in the Windows font list. ・Displays uninstalled fonts in red in the dialog boxes for graphics text strings. ・Prohibits changes to text properties of items using uninstalled fonts. ・Prohibits zooming up or down of graphics text strings or other components in screens that are using uninstalled fonts. ・Displays a list of the Windows fonts in use. (b) Model with PLC 2-way connection capability added. Maker Model KEYENCE KV-700/1000 (c) Model supporting temperature control networks has been added. Maker Model SANKEN ELECTRIC SAMCO-e, SAMCO-vm05 (Inverter)

(5) V3.2.18.0
	(a) New models compatible with printers added Maker Model Interface EPSON PX-V600 USB, parallel PX-V700 USB, parallel STYLUS C86 (USA) USB, parallel (b) Modbus TCP/IP slave function added In addition to the conventional Modbus slave using Modbus RTU protocol, Modbus TCP/IP slave with the similar function over Ethernet has been added. (c) Model with PLC 2-way connection capability added. Maker Model KEYENCE KV-10/24 CPU (d) Model supporting temperature control networks has been added. Maker Model YAMATAKE DCP31/32 (e) Connectable PLCs have been added. Maker Model MITSUBISHI ELECTRIC MELSEC-Q (Multi CPU)

(6) V3.2.17.0
	(a) Language switching menu on multi-language sheet and message edit screens When multiple language input is required using Windows fonts (without CF card) on multi-language sheet and message edit screens, the display language switching menu has been added to enable editing in multi-language by selecting required font. (b) Model with PLC 2-way connection capability added Maker Model TOYODA MACHINE WORKS TOYOPUC (c) Model supporting temperature control networks has been added. Maker Model FUJI ELECTRIC TECHNICA WA5000

(7) V3.2.16.0
	(a) MJ2 setting for PLC communications with UG230A-DCL mounted to the UG230 MJ2 can now be selected as the PLC communications port setting when the UG230A-DCL expansion unit is mounted to the UG230. (b) UG30A-VIS video image edge enhancing display mode added A function has been added to enhance the edges of text or graphics that are superimposed onto video images in order to provide images with sharper contour delineation. (c) I/O monitor bit No. display for Mitsubishi Q-series ladder monitor function A bit No. display has been added to the I/O monitor binary display of the Mitsubishi Q-series ladder monitor function. (d) DEC/BCD selection added to temperature control network/PLC 2-way setting A DEC/BCD selection has been added to the previous DEC fixed setting for the temperature control memory. (e) Recipe file data acquisition macro added A recipe file data acquisition macro (GET_RECIPE_FILEINFO) has been added to simplify the retrieval of line and column numbers for designated files with the POD. (f) MODICON Modbus RTU MultiLink setting disabled This setting has been disabled because MultiLink connection using the PLC Modbus RTU manufactured by Schneider (MODICON) is not possible, but the setting can be erroneously made with the editor. (g) PLCs with ladder transfer function added Maker Model OMRON SYSMAC CS1/CJ1 (h) Model supporting temperature control networks has been added. Maker Model MITSUBISHI ELECTRIC FR-V500 SUNX LP-300 LP-400

4. Compatibility with Conventional Products
	Compatibility of screen data is shown below.   Screen data programmed by earlier versions Screen data programmed by V3.2.23.0 UG00 S-CW (V3) earlier versions Ο UG00S-CWV3 V3.2.23.0 Ο Ο Screen data incorporating any functions of the new version cannot be used by earlier versions of the screen programming software.

5. Upgrade Procedure
	(1) Create a new folder in any location of the PC's hard disk. (2) Download the V3.2.23.0 update file (UGUpdate_V3.2.23.0.exe) to the new folder. (3) Double-click the update file (self-extracting compressed file). (4) Files are extracted in the folder. (5) Among the extracted files, double-click the setup.exe in the "UGUpdate_e" folder. (6) Install the software according to the installer's instructions. (7) When the installation procedure is completed, activate UG00S and make sure the version number has been updated to V3.2.23.0 using the Help menu. If V3.2.23.0 is displayed, installation has completed successfully.

6. Notes on Upgrade
	(1) Install the update file to the PC in which UG00S-3W/3 WE/CW is installed. (2) The update file can be used only when the version of UG00S-3W/3 WE/CW already installed is V2.0.0.0 or later. (3) If the size of the update file differs from that of the downloaded file, discard the file and download it again. (4) The update file does not include Gothic font files, 3D Parts files, and English Gothic and Times font files. If you are using UG00S-3W/3WE (V2.3 or earlier), you need to download and install Gothic font files and 3D Parts file in addition to the update file. (If you are using UG00S-CW, you can skip this procedure.) (5) The update file includes the main program and I/F drivers for PLC.

You can download the screen creation software UG00S-CWV upgrade version from the Technical Information Service Screen (Free membership).