FUJI ELECTRIC Programmable Operation Display (POD) UG Series
Information on Version Upgrade of UG00S Screen Programming Software
1. Target Models
  Screen programming software for POD UG Series
Model Specification Latest version
UG00S-CWV3 Screen programming software, Japanese/English version V3.2.19.0
2. Major Revisions
(1) Windows Font Functions Added
Warning functions have been added that provide warnings when an attempt to edit screen data using
Windows fonts is made in a personal computer in which a specified font has not been installed.
・Searches for uninstalled fonts when the file is opened, and outputs a warning message.
・Detects uninstalled fonts during the error check and sends a warning.
・Displays uninstalled fonts in red in the Windows font list.
・Displays uninstalled fonts in red in the dialog boxes for graphics text strings.
・Prohibits changes to text properties of items using uninstalled fonts.
・Prohibits zooming up or down of graphics text strings or other components in screens that are using
uninstalled fonts.
・Displays a list of the Windows fonts in use.
(2) Model with PLC 2-way connection capability added.
Maker Model
KEYENCE KV-700/1000
(3) Model supporting temperature control networks has been added.
Maker Model
SANKEN ELECTRIC SAMCO-e, SAMCO-vm05 (Inverter)
3. Revision History (Major Revisions)
(1) V3.2.18.0
(a) New models compatible with printers added
Maker Model Interface
EPSON PX-V600 USB, parallel
PX-V700 USB, parallel
STYLUS C86 (USA) USB, parallel
(b) Modbus TCP/IP slave function added
In addition to the conventional Modbus slave using Modbus RTU protocol, Modbus TCP/IP slave with the similar function over Ethernet has been added.
(c) Model with PLC 2-way connection capability added.
Maker Model
KEYENCE KV-10/24 CPU
(d) Model supporting temperature control networks has been added.
Maker Model
YAMATAKE DCP31/32
(e) Connectable PLCs have been added.
Maker Model
MITSUBISHI ELECTRIC MELSEC-Q (Multi CPU)
(2) V3.2.17.0
(a) Language switching menu on multi-language sheet and message edit screens
When multiple language input is required using Windows fonts (without CF card) on multi-language sheet and message edit screens, the display language switching menu has been added to enable editing in multi-language by selecting required font.
(b) Model with PLC 2-way connection capability added
Maker Model
TOYODA MACHINE WORKS TOYOPUC
(c) Model supporting temperature control networks has been added.
Maker Model
FUJI ELECTRIC TECHNICA WA5000
(3) V3.2.16.0
(a) MJ2 setting for PLC communications with UG230A-DCL mounted to the UG230
MJ2 can now be selected as the PLC communications port setting when the UG230A-DCL expansion unit is mounted to the UG230.
(b) UG30A-VIS video image edge enhancing display mode added
A function has been added to enhance the edges of text or graphics that are superimposed onto video images in order to provide images with sharper contour delineation.
(c) I/O monitor bit No. display for Mitsubishi Q-series ladder monitor function
A bit No. display has been added to the I/O monitor binary display of the Mitsubishi Q-series ladder monitor function.
(d) DEC/BCD selection added to temperature control network/PLC 2-way setting
A DEC/BCD selection has been added to the previous DEC fixed setting for the temperature control memory.
(e) Recipe file data acquisition macro added
A recipe file data acquisition macro (GET_RECIPE_FILEINFO) has been added to simplify the retrieval of line and column numbers for designated files with the POD.
(f) MODICON Modbus RTU MultiLink setting disabled
This setting has been disabled because MultiLink connection using the PLC Modbus RTU manufactured by Schneider (MODICON) is not possible, but the setting can be erroneously made with the editor.
(g) PLCs with ladder transfer function added
Maker Model
OMRON SYSMAC CS1/CJ1
(h) Model supporting temperature control networks has been added.
Maker Model
MITSUBISHI ELECTRIC FR-V500
SUNX LP-300
LP-400
(4) V3.2.14.0
(a) Change in setting type name for the MICREX-SX series PLC 2-Way function.
"MICREX-SX SPH/SPB series" to "MICREX-SX SPH/SPB series (IEC mode)"
(b) Model with PLC 2-way connection capability added
Maker Model
FUJI ELECTRIC FA MICREX-SX SPH F mode (RS-232C)
MICREX-SX SPH N mode (RS-232C)
HITACHI HIDIC-S10/4α
(c) Model supporting temperature control networks has been added.
Maker Model
MITSUBISHI ELECTRIC FR-V500
SUNX LP-F10
(d) Connectable PLCs have been added.
Maker Model
HITACHI HIDIC-S10/4α
(5) V3.2.13.0
(a) Change in the memory setting range for the GLOFA series LG PLC
The memory setting range for the GLOFA series has expanded from "M0-65535" to "M0-1048575".
(b) Model supporting temperature control networks has been added.
Maker Model
FUJI ELECTRIC FA FVR-E11S(Modbus)
FVR-C11S(Modbus)
FRENIC5000G11S/P11S(Modbus)
FRENIC5000VG7S(Modbus)
FRENIC-Eco(Modbus)
Yamatake AHC2001
IAI ROBO CYLINDER (RCP2/ERC,RCS)
(C) Connectable PLCs have been added.
Maker Model
- Modbus RTU FREE FORMAT
(6) V3.2.12.0
(a) Supported by MICREX-SX series loader "PLC Programmer Standard"
(b) Operand indications changed in Keyence PLC model KV-700 and KV-1000.
The operands of input/output relays, internal utility relays and special utility relays have been changed from "CH" to "R".
(c) Model with PLC 2-way connection capability added
Maker Model
FUJI ELECTRIC FA MICREX-SX SPH/SPB IEC mode (RS-233C)
(d) Model supporting temperature control networks has been added.
Maker Model
YASKAWA CONTROLS E-POSI
(e) Connectable PLCs have been added.
Maker Model
KEYENCE KV-1000 (Ethernet TCP/IP)
(7) V3.2.11.0
(a) Number of correction points changed in detachable POD touch panel
The number of correction points has been changed from four to nine.
(b) Switch added to delete CF card data
A delete switch has been added to the transfer menu of the local screen card menu that makes it possible to delete all of the data in a FAT-formatted CF card.
(c) JPEG search switch and output of displayed JPEG File No. to memory functions added
A JPEG search switch with a flexible increment/decrement value setting has been added. A function to output the presently displayed JPEG file No. to memory has also been added.
(d) Model with PLC 2-way connection capability added
Maker Model
HITACHI HIDIC-S10/2α,S10mini
(e) PLCs with ladder transfer function added
Maker Model
FUJI ELECTRIC FA MICREX-SX SPB
YOKOGAWA ELECTRIC FA-M3,FA-M3R
(8) V3.2.10.0
(a) Model supporting temperature control networks has been added.
Maker Model
FUJI ELECTRIC FA FALDIC-W
UNIPULSE F600
(b) Connectable PLCs have been added.
Maker Model
FUJI ELECTRIC FA MICREX-SX PC BOARD (TELLUS only)
MITSUBISHI ELECTRIC FX-3UC CPU
4. Compatibility with Conventional Products
Compatibility of screen data is shown below.
  Screen data programmed by earlier versions Screen data programmed by V3.2.19.0
UG00 S-CW (V3) earlier versions Ο
UG00S-CWV3 V3.2.19.0 Ο Ο
Screen data incorporating any functions of the new version cannot be used by earlier versions of the screen programming software.
5. Upgrade Procedure
(1) Create a new folder in any location of the PC's hard disk.
(2) Download the V3.2.19.0 update file (UGUpdate_V3.2.18.03.2.19.0.exe) to the new folder.
(3) Double-click the update file (self-extracting compressed file).
(4) Files are extracted in the folder.
(5) Among the extracted files, double-click the setup.exe in the "UGUpdate_e" folder.
(6) Install the software according to the installer's instructions.
(7) When the installation procedure is completed, activate UG00S and make sure the version number has been updated to V3.2.19.0 using the Help menu. If V3.2.19.0 is displayed, installation has completed successfully.
6. Notes on Upgrade
(1) Install the update file to the PC in which UG00S-3W/3 WE/CW is installed.
(2) The update file can be used only when the version of UG00S-3W/3 WE/CW already installed is V2.0.0.0 or later.
(3) If the size of the update file differs from that of the downloaded file, discard the file and download it again.
(4) The update file does not include Gothic font files, 3D Parts files, and English Gothic and Times font files. If you are using UG00S-3W/3WE (V2.3 or earlier), you need to download and install Gothic font files and 3D Parts file in addition to the update file. (If you are using UG00S-CW, you can skip this procedure.)
(5) The update file includes the main program and I/F drivers for PLC.

You can download the screen creation software UG00S-CWV upgrade version from the Technical Information Service Screen (Free membership).
Enter the Technical Information Service Site