Built-in DC reactor series
Three-phase 200V series
| Item | Specifications | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type (FRN  F1H-2J) |
0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | ||
| Applicable motor rating [kW] *1 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | ||
 |
Rated capacity [kVA] *2 | 1.6 | 2.6 | 4,0 | 8,3 | 8.3 | 11 | 16 | 21 | 25 | 30 | 40 | 49 | 59 | 75 | 102 | |
| Voltage [V] *3 | Three-phase 200 to 240V (with AVR function) | ||||||||||||||||
| Rated current [A] *4,*9 | 4.2 | 7.0 | 10.6 | 16.7 | 23.8 (22.5) |
31.8 (29) |
45 (42) |
58 (55) |
73 (68) |
85 (80) |
114 (107) |
140 (130) |
170 (156) |
211 (198) |
276 (270) |
||
| Overload capability | 120% of rated current for 1min | ||||||||||||||||
| Rated frequency [Hz] | 50, 60Hz | ||||||||||||||||
 |
Phases, voltage, frequency |
Main power supply | Three-phase, 200 to 240V, 50/60Hz | Three-phase, 200 to 220V/50Hz Three-phase, 200 to 230V/60Hz |
|||||||||||||
| Auxiliary control power input | Single-phase, 200 to 240V, 50/60Hz | Single-phase, 200 to 220V/50Hz Single-phase, 200 to 230V/60Hz |
|||||||||||||||
| Auxiliary fan power input *8 | - | Single-phase, 200 to 220V/50Hz Single-phase, 200 to 230V/60Hz |
|||||||||||||||
| Voltage/frequency variations | Voltage: +10 to -15% (Voltage unbalance: 2% or less *7), Frequency: +5 to -5% | ||||||||||||||||
| Rated input current [A] *5 | 3.2 | 6.1 | 8.9 | 15.0 | 21.1 | 28.8 | 42.2 | 57.6 | 71.0 | 84.4 | 114 | 138 | 167 | 203 | 282 | ||
| Required power supply capacity [kVA] | 1.2 | 2.2 | 3.1 | 5.3 | 7.4 | 10 | 15 | 20 | 25 | 30 | 40 | 48 | 58 | 71 | 98 | ||
 |
Braking torque [%] *6 | 20 |
10-15 |
||||||||||||||
| DC injection braking | Starting frequency: 0.0 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level: 0 to 60% | ||||||||||||||||
| Reactor unit | DC REACTOR | Provided (If load of 100% is used (rated output) used, power supply ratio is above 86%.) | |||||||||||||||
| Zero-phase reactor | Provided (for radio noise reduction) | Not provided | |||||||||||||||
| Capacitive filter | Provided (removable) | Not provided | |||||||||||||||
| Applicable safety standards | UL508C, C22.2No.14, EN50178: 1997 (Approval pending) | ||||||||||||||||
| Enclosure (IEC60529) | IP20, UL open type | IP20, UL type1 (NEMA1) | |||||||||||||||
| Cooling method | Natural cooling | Fan cooling | |||||||||||||||
| Weight / Mass [kg] | 5.9 | 6.2 | 6.6 | 6.7 | 6.9 | 12.7 | 13.6 | 15.3 | 18.7 | 19.5 | 23 | 39 | 52 | 55 | 63 | ||
| *1 | Fuji 4-pole standard motor |
| *2 | Rated capacity is calculated by assuming the output rated voltage as 220V for three-phase 200V series and 440V for three-phase 400V series. |
| *3 | Output voltage cannot exceed the power supply voltage. |
| *4 | When the carrier frequency is low, the temperature of the motor may increases rapidly or the inverter protection (current limit) may activate. When setting the carrier frequency to 1kHz or less, reduce the load to 80% of its rated value. |
| *5 | The value is calculated on assumption that the inverter is connected with a power supply capacity of 500kVA (or 10 times the inverter capacity if the inverter capacity exceeds 50kVA) and %X is 5%. |
| *6 | Average braking torque without optional braking resistor (Varies with the efficiency of the motor.) |
| *7 | Voltage unbalance (%) = ( MAX. voltage(V) - Min. voltage(V) ) / ( Therr-phase average voltage(V) ) x 67 (compliant with IEC61800-3) If this value is 2 to 3%, use an AC REACTOR (ACR option). |
| *8 | It is used as an AC fan power supply input for applications combined with a high power-factor PWM converter with power regeneration function or the like (not used during normal operation). |
| *9 | Use the inverter at the current given in ( ) or below when the carrier frequency setting is higher than 3kHz or the ambient temperature is 40°C or higher. |
