| COM port |
Setting Tips |
Reference Manual |
| A1.(1) |
Ensure that the screen data transfer cable UG00C-T is connected to the MJ1 port of the UG and the COM port of a PC. |
|
FEH375a Operation 5-5 |
| (2) |
For UG20 series, set the baud rate less than 57,600 bps. (For UG30 series, the baud rate of up to 115200 bps can be set.) |
[File] → [Transfer]
(Detailed settings) |
FEH375a Operation 5-11 |
| (3) |
If MJ1 is set in other than the Editor port, change the POD screen to the local main screen and transfer the data. |
[System Setting] → [Modular Jack] |
FEH376a Function 1-20 |
| A2.(1) |
Check that the COM port is not occupied with the other software such as ladder software. |
|
|
| (2) |
Check the currently used COM port. |
[File] → [Transfer]
(Detailed setting) |
FEH375a Operation 5-11 |
| A3.(1) |
Activate the simulator when transferring data after setting a checkmark at “Use simulator.” |
[File] → [Transfer] |
FEH375a Operation 5-11 |
