Category	Name	Type	Switch with SW on the PCB.	Specifications
Analog card	Synchronized operation card	OPC-VG7-SN		Synchronizing interface circuits for dancer control.
	F/V converter	OPC-VG7-FV		F/V converter
	Aio extension card	OPC-VG7-AIO		Extension card of Ai: 2 points + Ao 2 points.
	Ai extension card	OPC-VG7-AI		Extension card of Ai: 2 points.
Digital card (for 8-bit bus)	Di interface card	OPC-VG7-DI	OPC-VG7-DI(A)	16-bit Di of binary or 4-digit BCD + sign. For setting the speed, torque and the torque current reference.
			OPC-VG7-DI(B)
	Dio extension card	OPC-VG7-DIO	OPC-VG7-DIO(A)	Extension of Di(4 bits) and Do(8 bits) for function selecting. Dio option card for direct landing control. Di × 16 bit + Do × 10 bit
			OPC-VG7-DIO(B)	UPAC exclusive use
	PG interface extension card	OPC-VG7-PG	OPC-VG7-PG(SD)	+5V line drivers type, voltage output PGs (A,B and Z-phase signals). Used for detecting motor speed, line speed, position reference and position detection.
			OPC-VG7-PG(LD)
			OPC-VG7-PG(PR)
			OPC-VG7-PG(PD)
		OPC-VG7-PGo	OPC-VG7-PGo(SD)	Open collector type voltage output PGs (A,B and Z-phase signals). Used for detecting motor speed, line speed, position reference and position detection.
			OPC-VG7-PGo(LD)
			OPC-VG7-PGo(PR)
			OPC-VG7-PGo(PD)
	T-link interface card	OPC-VG7-TL		T-link interface card for FUJI MICREX-F series PLC.
	High-speed serial card	OPC-VG7-SI		Used for multiwinding motor drive system.
		OPC-VG7-SIU		Used for UPAC communication system.
		OPC-VG7-SIR		Used for parallel motor drive systems with reactor.
	RS-485 extension card	OPC-VG7-RS		I/F option card for UPAC communication and RS-485.
	CC-Link interface card	OPC-VG7-CCL *
	PG card for synchronous motor driving	OPC-VG7-PMPG		+5V line drivers type Open collector type	A, B + magnetic pole position (max. 4 bits).
		OPC-VG7-PMPGo
	Magnet orientation card	OPC-VG7-MG		Position control of controlled axis with the use of magnet sensor.
	Resolver interface card	OPC-VG7-RD		Resolver interface card
Digital card (for 16-bit bus)	User Programmable Application Card	OPC-VG7-UPAC		Technology card
	SX bus interface card	OPC-VG7-SX *		SX bus interface card for FUJI MICREX-SX series PLC.
Fieldbus interface unit	PROFIBUS-DP	OPC-VG7-PDP *		Used as interface between KEYPAD and inverter unit.
	DeviceNet	OPC-VG7-DEV *
Separate installation type	Synchronized operation unit	MCA-VG7-SN		Synchronizing interface circuits
	F/V converter	MCA-VG7-FV		F/V converter
	Dancer controller	MCAII-PU		Dancer controller
	PG signal switch	MCA-VG7-CPG		Switch between PG and NTC signal (2-signal switch)
Loader	Inverter support loader	WPS-VG7-PCL		For Windows.
Package software	Tension control software	WPS-VG7-TEN		For Windows.
	Dancer control software	WPS-VG7-DAN		Supplied with inverter support loader CD-ROM.
	Position control software	WPS-VG7-POS

NOTE: The items marked with * cannot be used for the VG7S of standard version. The VG7S equipped with these items will be of special version.For details, please contact your FUJI sales representative.

Category	Name	Type	Standard length	Max. length	Specifications
Cable	Extension cable for KEYPAD	CBIII-10R-2S	2m	2m	Connection cable between an inverter and the KEYPAD panel
		CBIII-10R-1C	1m	5m
		CBIII-10R-2C	2m	10m
	RS-485 / RS232C converter with cable	NP4H-CNV	2m	2m	Converter with cable for a personal computer loader

●Maximum installable number of inverter built-in option cards (4)

Category	Maximum installable number
	Example 1	Example 2
Analog card	1	0
Digital card (for 8-bit bus)	1	2
Digital card (for 16-bit bus)	1	1
Field bus interface unit	1	1

●Restrictions for installing built-in option cards