Fuji Electric Corp. of America
FRENIC Multi
Product Information
Download
Warranty
Inquiries
Site Map
HOME
Product Information ---Option
Braking resistor DC REACTOR Devices requiring wiring
Interface card    
Interface card
 
RS-485 communication card (OPC-F1-RS)
Built-in type
Connection with a host (master) device such as PC or PLC allows you to control FRENIC-Multi as a subordinate (slave) device. (The card is added to the RS-485 communication devices for FRENIC-Multi.)
NOTE: This option card cannot be connected with the keypad or a support loader.
  ●Number of connectable devices: 1 host device and 31 inverters
●Number of ports: 2 ports
●Electric specifications: EIA RS-485
●Synchronization method: Start/stop
●Communication method: Half-duplex
●Transmission speed (bps): 2400, 4800, 9600, 19200 and 38400
●Maximum communication distance: 1600ft(500m)
●Terminating resistor: Built-in
 
PG interface card (OPC-E1-PG) for 5V
Built-in type
When this card is built in the inverter, positioning accuracy will improve, resulting in reduced positioning time and improved measuring accuracy by the measuring instrument.
 
PG interface card (OPC-E1-PG3) for 12V
Built-in type
Incorporating the interface card in the inverter permits accurate speed control and position control.The interface card can be used simultaneously with the communication bus for FRENIC-Multi series, optional DeviceNet card (OPC-E1-DEV), CC-Link card (OPC-E1-CCL), and PROFIBUS-DP card (OPC-E1-PDP).
TOP
 
 
DeviceNet card (OPC-E1-DEV)
Front installation type
Connection with the DeviceNet master unit permits application to the system that requires operation commands and frequency settings.
 
DIO card (OPC-E1-DIO)
Front installation type
This card allows frequency setting or status monitoring by exchanging digital signal data with the host controller.
 
SY card (synchronized operation) NOTE2)
Built-in type
Using this card allows synchronized operation of the two motors having a pulse generator (PG).
 
PROFIBUS-DP card (OPC-E1-PDP)
Front installation type
Connection with the PROFIBUS-DP card permits application to the system that requires operation commands and frequency settings.
 
Note1) An external power supply of 24V is needed to use a separately sold option card.
Note2) The inverter that can be used with the SY card includes special specifications. When ordering the SY card, please order together with the inverter in a set.

TOP
Front installation type External dimensions
 
TOP