The following diagram is for reference only. For detailed Wiring Diagrams, refer to the relevant instruction manual.

NOTE: Common terminals [11], (CM), and for control circuits are isolated from one another.

*1) Use the inverter whose rated input voltage matches the power supply voltage.
*2) Use this peripheral device when necessary.
*3) 75HP or smaller: Terminals [P1] and [P(+)] are connected with a jumper wire before shipping. When connecting an optional DC reactor (DCR)*6),remove the jumper wire that connects the terminals [P1] and [P(+)]. 100HP or larger: Terminals [P1] and [P(+)] are not connected at shipment from factory. Be sure to connect the DC reactor (DCR) *6) standard provided to these terminals.
*4) For G11S models from 1/4 to 10HP, a built-in braking resistor (DBR) is connected to the nverter before shipping. (DBR is not mounted on G11S models 15HP or larger,and P11S models.)
*5) Terminals [R0] and [T0] are provided for G11S models 2HP or larger, and P11S models. hese terminals are not provided for G11S models 1HP or smaller. Even if these terminals are not powered, the inverter can be operated.