Item			Explanation
			G11S	P11S
Output frequency		Maximum frequency	50 to 400Hz	50 to 120Hz
		Base frequency	25 to 400Hz	25 to 120Hz
		Starting frequency	0.1 to 60Hz, Holding time: 0.0 to 10.0s
		Carrier frequency *1)	0.75 to 15kHz (75HP or smaller) 0.75 to 10kHz (100HP or larger)	0.75 to 15kHz (30HP or smaller) 0.75 to 10kHz (40 to 100HP) 0.75 to 6kHz (125HP or larger)
	Accuracy (Stability)		. Analog setting . Digital setting : ±0.2% of Maximum frequency (at 25±10°C(77±50°F)) : ±0.01% of Maximum frequency (at –10 to +50°C(14±122°F))
	Setting resolution		. Analog setting . Digital setting . LINK setting : • 1/1000 of Maximum frequency ex.) 0.06Hz at 60Hz, 0.12Hz at 120Hz, (0.4Hz at 400Hz: G11S) • 1/3000 for 40HP and above : 0.01Hz at Maximum frequency of up to 99.99Hz (0.1Hz at Maximum frequency of 100Hz and above) : • 1/20000 of Maximum frequency ex.) 0.003Hz at 60Hz, 0.006Hz at 120Hz, (0.02Hz at 400Hz: G11S) • 0.01Hz (Fixed)
Control	Control method		• V/f control (Sinusoidal PWM control) • Dynamic torque-vector control (Sinusoidal PWM control) • Vector control with PG (*) (G11S only)
	Voltage / freq. (V/f) characteristic		Adjustable at base and maximum frequency, with AVR control : 320 to 480V (460V), 80 to 240V (230V)
	Torque boost		Selectable by load characteristics: Constant torque load (Auto/manual), Variable torque load (Manual)
	Operation method		• KEYPAD operation : or key, key • Digital input signal operation : FWD or REV command, Coast-to-stop command, etc. • LINK operation : RS-485 (Standard) 　T-Link (FUJI private link), PROFIBUS-DP, Interbus-S, DeviceNet, Modbus Plus, JPCN1 (Option)
	Frequency setting (Frequency command)		• KEYPAD operation: or key • External potentiometer (*) : 1 to 5kΩ (1/2W) • Analog input (Reversible) (Inverse) : 0 to +10V DC (0 to +5V DC), 4 to 20mA DC 　0 to ±10V DC (0 to ± 5V DC) ....Reversible operation by polarized signal can be selected. 　+10 to 0V DC, 20 to 4mA DC......Inverse mode operation can be selected. • UP/DOWN control : Output frequency increases when UP signal is ON, and decreases when DOWN signal is ON. • Multistep frequency : Up to 16 different frequencies can be selected by digital input signal. • Pulse train input (*) : 0 to 100kp/s • Digital signal (parallel ) (*) : 16-bit binary • LINK operation : RS-485 (Standard) 　T-Link (FUJI private link), RPOFIBUS-DP, Interbus-S, DeviceNet, Modbus Plus, JPCN1 (Option) . Programmed PATTERN operation: Max. 7 stages
	Jogging operation		or key, FWD or REV digital input signal
	Running status signal		Transistor output (4 points) : RUN, FAR, FDT, OL, LU, TL, etc. Relay output (2 points) : • Same as transistor output • Alarm output (for any fault) Analog output (1 point) : Output frequency, Output current, Output torque, etc. Pulse output (1 point) : Output frequency, Output current, Output torque, etc.
	Acceleration / Deceleration time		0.01 to 3600s : • Independently adjustable acceleration and deceleration • 4 different times are selectable. Mode select : Linear, S-curve (weak), S-curve (strong), Non-linear
	Active drive		When the acceleration time reaches 60s, the motor output torque is automatically reduced to rated torque. Then the motor operation mode is changed to torque limiting operation. The acceleration time is automatically extended up to 3 times.
	Frequency limiter		High and Low limiter can be preset.
	Bias frequency		Bias frequency can be preset.
	Gain for frequency setting		Gain for frequency setting can be preset. (0.0 to 200.0%) ex.) Analog input 0 to +5V DC with 200% gain results in maximum frequency at 5V DC.
	Jump frequency control		Jump frequency (3 points) and its common jump hysteresis width (0 to 30Hz) can be preset.
	Rotating motor pick up (Flying start)		A rotating motor (including inverse rotating mode) can be smoothly picked up without stopping the motor (speed search method).
	Auto-restart after momentary power failure		Automatic restart is available without stopping motor after a momentary power failure (speed search method). When "Smooth recovery" mode is selected, the motor speed drop is held minimum. (The inverter searches the motor speed, and smoothly returns to setting frequency. Even if the motor circuit is temporarily opened, the inverter operates without a hitch. )
	Line / Inverter changeover operation		Controls the switching operation between line power and inverter. The inverter has sequence function inside.
	Slip compensation		The inverter output frequency is controlled according to the load torque to keep motor speed constant. When the value is set at "0.00" and "Torque-vector" is set at "active", the compensation value automatically selects the Fuji standard motor. Slip compensation can be preset for the second motor.
	Droop operation		The motor speed droops in proportion to output torque (–9.9 to 0.0Hz)......G11S only.
	Torque limiting		• When the motor torque reaches a preset limiting level, this function automatically adjusts the output frequency to prevent the inverter from tripping due to an overcurrent. • Torque limiting 1 and 2 can be individually set, and are selectable with a digital input signal.
	Torque control		Output torque (or load factor) can be controlled with an analog input signal.....G11S only.
	PID control
	Automatic deceleration		Torque limiter 1 (Braking) is set at "F41: 0" (Same as Torque limiter 2 (Braking) ). • In deceleration 　: The deceleration time is automatically extended up to 3 times the setting time for tripless operation even if braking resistor not used. • In constant speed operation　 : Based on regenerative energy, the frequency is increased and tripless operation is active.
	Second motor’s setting		This function is used for two motors switching operation. • The second motor’s V/f characteristics (base and maximum frequency) can be preset. • The second motor’s circuit parameter can be preset. Torque-vector control can be applied to both motors.
	Energy saving operation		This function minimizes inverter and motor losses at light load.
	Fan stop operation		This function is used for silent operation or extending the fan's lifetime.
	Universal DI		Transmits to main controller of LINK operation.
	Universal DO		Outputs command signal from main controller of LINK operation.
	Universal AO		Outputs analog signal from main controller of LINK operation.
	Zero speed control (*)		The stopped motor holds its rotor angle.....G11S only.
	Positioning control (*)		The SY option card can be used for positioning control by differential counter method.
	Synchronized operation (*)		This function controls the synchronize operation between 2 axes with PGs.

Note: (*) Option
*1) Inverter may automatically reduce carrier frequency, in accordance with ambient temperature or output current for protecting inverter.

Item		Explanation
Indication	Operation mode (Running)	LED monitor	LCD monitor (Japanese, English, German, French, Spanish, Italian)
		• Output frequency 1 (Before slip compensation) (Hz) • Output frequency 2 (After slip compensation) (Hz) • Setting frequency (Hz) • Output current (A) • Output voltage (V) • Motor synchronous speed (r/min) • Line speed (m/min) • Load shaft speed (r/min) • Torque calculation value (%) • Input power (kW) • PID reference value • PID reference value (remote) • PID feedback value . Trip history :Cause of trip by code (Even when main power supply is off, trip history data of the last 4 trips are retained.)	Operation monitor & Alarm monitor Operation monitor • Displays operation guidance • Bargraph: Output frequency (%), Output current (A), Output torque (%) Alarm monitor • The alarm data is displayed when the inverter trips. Function setting & monitor Function setting Displays function codes and its data or data code, and changes the data value. Operation condition • Output frequency (Hz) • Output current (A) • Output voltage (V) • Torque calculation value (%) • Setting frequency (Hz) • Operation condition (FWD / REV, IL, VL / LU, TL) • Motor synchronous speed (r/min) • Load shaft speed (r/min) • Line speed (m/min) • PID reference value • PID feedback value • Driving torque limiter setting vaiue (%) • Braking togue limiter setting value (%) Tester function (I/O check) • Digital I/O :■ (ON),□ (OFF) • Analog I/O: (V), (mA), (H), (p/s) Maintenance data • Operation time (h) • DC link circuit voltage (V) • Temperature at inside air (°C) • Temperature at heat sink (°C) • Maximum current (A) • Main circuit capacitor life(%) • Control PC board life (h) • Cooling fan operation time (h) • Communication error times (KEYPAD,RS-485, Option) • ROM version (Inverter, KEYPAD, Option) Load factor calculation • Measurement time (s) • Maximum current (A) • Average current (A) • Average braking power (%) Alarm data • Output frequency (Hz) • Output current (A) • Output voltage (V) • Torque calculation value (%) • Setting frequency (Hz) • Operation condition (FWD / REV, IL, VL / LU, TL) • Operation time (h) • DC link circuit voltage (V) • Temperature at inside air (°C) • Hest sink temperature (°C) • Communication error times (KEYPAD,RS-485, Option) • Digital input terminal condition (Remote, Communication) • Transistor output terminal condition • Trip history code • Multiple alram exist
	Stopping	Selected setting value or output value
	Trip mode	Displays the cause of trip by codes as follows. • OC1 (Overcurrent during acceleration) • OC2 (Overcurrent during deceleration) • OC3 (Overcurrent during running at constant speed) • EF (Ground fault) • Lin (Input phase loss) • FUS (Fuse blown) • OU1 (Overvoltage during acceleration) • OU2 (Overvoltage during deceleration) • OU3 (Overvoltage running at constant speed) • LU (Undervoltage) • OH1 (Overheating at heat sink) • OH2 (External thermal relay tripped) • OH3 (Overtemperature at inside air) • dBH (Overheating at DB circuit) • OL1 (Motor 1 overload) • OL2 (Motor 2 overload) • OLU (Inverter unit overload) • OS (Overspeed) • PG (PG error) • Er1 (Memory error) • Er2 (KEYPAD panel communication error) • Er3 (CPU error) • Er4 (Option error) • Er5 (Option error) • Er6 (Operation procedure error) • Er7 (Output phase loss error, impedance imbalance) • Er7. (Charging circuit alarm, 30kW or larger) • Er8 (RS-485 error)
	Charge lamp	When the DC link circuit voltage is higher than 50V, the charge lamp is ON.
Protection	Overload	Protects the inverter by electronic thermal overload function and by detection of inverter temperature.
	Overvoltage	Detects DC link circuit overvoltage,and stops the inverter. (460V: 800V DC, 230V: 400V DC)
	Undervoltage	Detects DC link circuit undervoltage,and stops the inverter. (460V: 400V DC, 230V: 200V DC)
	Input phase loss	Phase loss protection for power line input.
	Overheating	Protects the inverter by detection of inverter temperature.
	Short-circuit	Short-circuit protection for inverter output circuit
	Ground fault	• Ground fault protection for inverter output circuit (3-phase current detection method) • Zero-phase current detection method (40HP or larger)
	Motor overload	• The inverter trips,and then protects the motor. • Electronic thermal overload protection can be set for standard motor or inverter motor • Thermal time constant (0.5 to 75.0 minutes) can be preset for a special motor. • The second motor's electronic thermal overload protection can be preset for 2-motor changeover operation.
	DB resistor overheating	• Prevents DB resistor overheating by internal electronic thermal overload relay (10HP or smaller). • Prevents DB resistor overheating by external thermal overload relay attached to DB resistor (15HP or larger). (The inverter stops electricity discharge operation to protect the DB resistor.)
	Stall prevention	• Controls the output frequency to prevent (overcurrent) trip when the output current exceeds the limit value during acceleration. • Lowers the output frequency to hold almost constant torque when the output current exceeds the limit value during operation at constant speed. • Controls the output frequency to prevent (overvoltage) trip when the DC link circuit voltage exceeds the limit value during deceleration.
	Output phase loss	When the inverter executes auto-tuning, detects each phase impedance imbalance.
	Motor protection by PTC thermistor	When the motor temperature exceeds allowable value, the inverter trips automatically.
	Auto reset	When the inverter is tripped, it resets automatically and restarts.
Condition (Installation and operation)	Installation location*	Free from corrosive gases, flammable gases, oil mist, dusts, and direct sunlight. Indoor use only. * If the inverter has to be used in an atmosphere including the hydrogen sulfide gases, a special model might be available. Contact Fuji Electric FA.
	Altitude	3300ft(1000m) or less. Applicable to 9800ft(3000m) with power derating (-10%/3300ft(1000m))
	Ambient temperature	–10 to +50 °C.(14 to 122°F) For inverters of 30HP or smaller, remove the ventilation covers when operating it at a temperature of 40 °C(104°F) or above.
	Ambient humidity	5 to 95%RH (non-condensing)
	Vibration	3mm at from 2 to less than 9Hz, 9.8m/s2 at from 9 to less than 20Hz, 2m/s2 at from 20 to less than 55Hz (2m/s2 at from 9 to less than 55Hz :G11S 125HP, P11S 150HP or more) 1m/s2 at from 55 to less than 200Hz,
Storage condition		-Temperature : –25 to +65 °C(–13 to 144°F), -Humidity : 5 to 95%RH (non-condensing)