FUJI INVERTERS FRENIC5000G11S/P11S series

Appearance

Perform the wiring shown in the Basic Wiring diagram by clicking Wiring Diagram on the left. Turn on inverter power, and use the

key to set an output frequency. Press the

key, then press the

key.
The inverter starts running using the factory setting function data.
Press the

key to stop the inverter.

Procedure for selecting function codes and data codes

The following is a sample procedure for selecting a function code and changing the function data.

Press the key to switch the operation monitor screen to the program menu screen.

Select "1. DATA SET" , and press the key.

Press the or key to select a target function code. To quickly scroll the function select screen, press key and the or key at the same time.
At the target function, press key.

Use the , , and keys to change the function data to the target value. (Use the key to move the cursor when you want to enter a numerical value.)

Press the key to store the updated function data in memory.
The screen shifts for the selection of the next function.

Pressing the key switches the screen to the operation monitor screen.

1) Setting a frequency
When the operation monitor screen is displayed, a frequency can be set by using the

key in both the operation and stop modes. When the target frequency is displayed, press the

key to enter the frequency in memory.
2) Switching a unit indication
During both operation and stop modes, each time the

key is pressed, the value displayed on the LED monitor changes, and the unit indication on the LCD monitor shifts from Hz to A, V, r/min, m/min, kW, and % in this order in accordance with the displayed value.