Use this interface card to enter or monitor operation commands or frequency or to change or check the settings of function codes necessary for operation at the master station of DeviceNet.
-
Number of connected nodes :
Max. 64 (including the master)
-
MAC ID : 0 to 63
-
Insulation : 500V DC (by photocoupler)
-
Transmission speed : 500kbps/250kbps/125kbps
-
Network power consumption : ax. 50mA at 24V DC
BACnet card (OPC-F1-BAC)
Available soon
Relay output card (OPC-F1-RY)
Use this option card to convert the transistor outputs issued from the terminals Y1 to Y3 of the main body of FRENIC-Eco into relay outputs. Note: FRENIC-Eco's terminals Y1 to Y3 cannot be used while this card is installed.
With this interface card, you can do the following operations from the PROFIBUS-DP master: issuing the inverter operation command, issuing the frequency command, monitoring the operating status, and changing the settings in all the function codes of FRENIC-Eco.
-
Transmission speed: 9.6kbps to 12Mbps
-
Transmission distance: Max. 3900ft (1200m)
-
Connector: 6-pole terminal base
LON WORKS interface card (OPC-F1-LNW)
With use of this interface card, the peripheral devices (including a master) linked through LON WORKS can be connected to FRENIC-Eco. This allows you to issue an operation command or a frequency setting command from the master.
