Fuji Electric Corp. of America
FRENIC Eco
Product Information
Download
FAQ
Warranty
Inquiries
Site Map
 
Back to HOME
 
Product Information - Appearance

Product appearance Exploded view of main body
Keypad switches and functions Monitor display & key operation

Monitor display & key operation
 
Item Monitor, LED
indicator or Key		 Functions
LED/LCD
Monitor
Five-digit, 7-segment LED monitor which displays the following according to the operation mode:
■In Running Mode: Running status information (e.g., output frequency, current, and voltage)
■In Programming Mode: same as above
■In Alarm Mode: Alarm code, which identifies the cause of alarm if the protective function is activated.
LCD monitor which displays the following according to the operation modes:
■In Running Mode: Running status information
■In Programming Mode: Menus, function codes and their data
■In Alarm Mode: Alarm code, which identifies the cause of alarm if the protective function is activated.
LED indicator
indexes		 In running mode, display the unit of the number displayed on the LED monitor and the running status information shown on the LCD monitor. For details,see next page.
Keypad
Operation
Key		 PRG Switches the operation modes of the inverter.
SHIFT Shifts the cursor to the right when entering a number.
RESET Pressing this key after removing the cause of an alarm will switch the inverter to Running Mode.
Used to reset a setting or screen transition.
UP and DOWN keys. Used to select the setting items or change the function code data displayed on the LED monitor.
FUNC DATA
Function/Data key. Switches the operation as follows:
■In Running Mode: Pressing this key switches the information to be displayed concerning the status of the inverter (output frequency (Hz), output current (A), output voltage (V), etc.).
■In Programming Mode: Pressing this key displays the function code and confirms the data you have entered.
■In Alarm Mode: Pressing this key displays the details of the problem indicated by the alarm code that has come up on the LED monitor.
Run
Operation
Key		 FWD Starts running the motor (forward rotation).
REV Starts running the motor (reverse rotation).
STOP Stops the motor.
REM LOC Pressing this toggle key for more than 1 second switches between Local and Remote modes.
LED
Indicator		 REM LOC Lights while a run command is supplied to the inverter.

Type Item Description (information, condition, status)
Unit of
Number
Displayed
on LED
Monitor		 Hz Output frequency, frequency command
A Output current
V Output voltage
% Calculated torque, load factor, speed
r/min Motor speed, set motor speed, load shaft speed, set load shaft speed
m/min Line speed, set line speed (Not applicable to FRENIC-Eco)
kW Input power, motor output
X10 Data greater than 99,999
min Constant feeding rate time, constant feeding rate time setting (Not applicable to FRENIC-Eco)
sec Timer
PID PID process value
Operating
Status		 FWD Running (forward rotation)
REV Running (reverse rotation)
STOP No output frequency
Source of
Operation		 REM Remote mode
LOC Local mode
COMM Communication enabled (RS-485 (standard, optional), field bus option)
JOG Jogging mode (Not applicable to FRENIC-Eco)
HAND Keypad effective (lights also in local mode)
 
TOP