|
|
RC Blowers & Pumps
We offer a wide range of regenerative blowers, high-pressure blowers, turbo style blowers, coolant pumps, air knife systems, and vacuum systems. We are also the North American distributor for Elektror Airsystems Gmbh. To view specific information about our products, please visit: www.fujiblowers.com.
 |
| VFC Series Ring Compressors |
The VFC Series are single-stage ring compressors with a maximum pressure of 139 in. H2O, a maximum vacuum of 110 in. H2O and a maximum capacity of 570 SCFM. Motors are direct drive from 1/10 to 20 HP. Voltages are available in 115 single phase, 230 single phase, 230/460 3-phase dependent upon motor size. All units are provided with threaded flanges.
|
| More Info |
|
 |
| VFD Series Ring Compressors |
The VFD Series are single and in some cases two stage ring compressors with a maximum pressure of 237 in. H2O, a maximum vacuum of 156 in. H2O, and a maximum capacity of 812 SCFM. Motors are direct drive from .87 to 30 HP. Voltages are available in 115 single phase, 230 single phase, 230/460 3-phase dependent upon motor size. All units are provided with threaded flanges.
|
| More Info |
|
 |
| VFT Series Turbo Blowers |
The VFT Series are turbo style blowers with a maximum pressure of 69 in. H2O and a maximum capacity of 3531 SCFM. Blowers are complete with belt driven TEFC motors from 7.5 to 30HP. All blowers are provided with cast aluminum housings and aluminum closed impellers. Motors are suitable for 230/460 3-phase voltage. Units are provided with mounting base and belt guard.
|
| More Info |
|
|
 |
| VKN - Self Priming Coolant Pumps |
The VKN pumps have mechanical seals and are intended for the circulation of coolant and spraying of cutting oil in all types of machines except grinders. They feature a ceramic stationary seal face, a carbon graphite rotating seal face, Buna-N elastomers, and steel springs.
|
| More Info |
|
 |
| VKP - Submersible Pumps |
The immersion-style pumps with no mechanical seals provide circulation of coolant and spraying of cutting oil in all types of machines including grinders. They are intended for use with non-flammable fluids that are compatible with pump construction materials. The maximum recommended viscosity is 1200 at 50Hz and 600 at 60Hz. The maximum liquid temperature is 104°F.
|
| More Info |
|
 |
| VKR & VKP - Submersible Pumps |
The high pressure pumps can provide up to 30% greater delivery pressure than the standard models. These pumps are designed to not have mechanical seals and provide circulation of coolant and spraying of cutting oil in all types of machines, including grinders. The maximum recommended viscosity is 1200 at 50Hz and 600 at 60Hz. The maximum liquid temperature is 104°F.
|
| More Info |
|
|
|
